Cactus Gray WildTrak on 37s - No lift

[RainbowStix]

I’ve got this exact tire setup, with just ~1” less backspacing at 4.75”, 3” lift, and a DIY mudflap. Just had the caster raised a bit to the 3.8-4 range so now it only rubs the flap under articulation, and in reverse.

taking the flap off, full steering range under articulation. Since your tires are more in, you should have less rubbing than me

and if you really wanted zero rubbing under every condition, my guess is trimming off those crash bar stubbies would get you there

Sponsored

 

[350vudu]

Quick update, slight rubbing when I take it off-road, headed in for a lift

What lift did you get? Any updated pics? I'm going with these same exact wheels and 37x12.5R18 Nitto Trail Grapplers. I'm looking at doing perch collars. Keeping my stock Sasquatch wheels for off-roading.

 

[linbackr99]

Was that a saquatch ? The 37s fit great

It is a Wildtrak. They're Squatched out of the box.

 

[CactusClub]

I added a 30mm spacer and she now rubs

 

[350vudu]

I added a 30mm spacer and she now rubs

Why the spacer? More poke?

 

[CactusClub]

Yeah wanted a little more of an aggressive stance

 

[350vudu]

Yeah wanted a little more of an aggressive stance

Your wheel was 9.5 wide with +12mm offset. I would assume that would give a decent poke. Any recent pics of the setup?

 

[davidbitton]

I have a Wildtrak, and I'd like to fit the BFG KO2 LT37x12.50R17 tires that are stacked up behind the shop right now. The tires are mounted on black rhino armory 17x9.5" -18 offset wheels. I'll need a set of adapters because these were on an F250 with an 8-bolt hub. The spacer/adapter is 2" (50.8mm). Does that make the offset -68 or +32? Thanks.

 

[Lurker B6G]

I have a Wildtrak, and I'd like to fit the BFG KO2 LT37x12.50R17 tires that are stacked up behind the shop right now. The tires are mounted on black rhino armory 17x9.5" -18 offset wheels. I'll need a set of adapters because these were on an F250 with an 8-bolt hub. The spacer/adapter is 2" (50.8mm). Does that make the offset -68 or +32? Thanks.

-68 which is CRAZY

Stock Sasquatch is +30 (same 12.5" tire width), and you will be 4 inches pushed out from the stock position (which is already an inch further out from the base model +55).

 

[davidbitton]

-68 which is CRAZY

Stock Sasquatch is +30 (same 12.5" tire width), and you will be 4 inches pushed out from the stock position (which is already an inch further out from the base model +55).

hmm, that's quite a bit of extra stick-out. thanks!

 

[Freedom5]

I'm gonna have my 37s mounted tomorrow. 37x12.50R17LT and wheels are 17x9 -12. I have a zone 3" that will be installed at the end of the month

Sponsored