getting this when i try that link:Actually someone posted this in another thread, so technically I can share this with you, right?
never mind, works fine when downloaded!
Sponsored
Last edited:
getting this when i try that link:Actually someone posted this in another thread, so technically I can share this with you, right?
Thanks! The integrated LED amber turn looks pretty good.Actually someone posted this in another thread, so technically I can share this with you, right?
Wtf? You probably drive in the rain with your headlights off too ?‍So those are the day running lights I take it. I usually pull the fuse for those so they aren't always on.
I hope they do a side-by-side with these lights and the lower trim lights. They are both LEDs but these are the signature LED lights. Definitely wanna close up to see the difference
No, Bronco has reflector LEDs.These are projectors , just in a round housing . Look at the closeup and you can see the two separate lenses .
Ok,Ok , ya'll got me . I'm off my game today . I don't know what I was thinking cause in my head I knew they were reflector ,LOL . These are probably better than the standard single bulb for High/low that Ford usually does though . I bet they are close to being the same effect as a projector since they use two separate reflectors .No, Bronco has reflector LEDs.
They are not projectors. There are two separate LED clusters in front of a reflector. Just like this.These are projectors , just in a round housing . Look at the closeup and you can see the two separate lenses .
I need more proof .They are not projectors. There are two separate LED clusters in front of a reflector. Just like this.
Looks like a stopper,,,,for the gate
The paint wearing off on that bottom rear hinge is making me nervous.
Even though they keep saying "pre-production", fix the issue. I would be greatly pissed if this happens on my rig.
Right, but its rubbing off the paint.Looks like a stopper,,,,for the gate
Yes,,,,I agree,,,not good,,,,,,I would be pissedRight, but its rubbing off the paint.
Not only that, but when engineering led reflector modules like this, you can angle the individual reflective surfaces down to the mm based on where you know the individual LEDs are... optimizing the design significantly better than an incandescent reflector housing.Ok,Ok , ya'll got me . I'm off my game today . I don't know what I was thinking cause in my head I knew they were reflector ,LOL . These are probably better than the standard single bulb for High/low that Ford usually does though . I bet they are close to being the same effect as a projector since they use two separate reflectors .
I like both. The ones on the WT I am getting are really cool with the DRL's.Agreed!! The lower-trim versions are more retro; which I like. BB for me; and I’ll spend my upgrade budget on a wild rims/tires setup.
Yep! Those are both the standard front lights and rear (incandescent) lights shown in that video.
Is it just me or do these appear to be the 'base' headlights (this is the new 'mansquatch' video)? The ambers turn on first then the headlights, with no indication of the 'signature' DRL anywhere. Usually when headlights are on with fancy DRLs the DRL stays on with the headlight, no?
Just trying to point this out as a possible example of the 'base' headlights as I know many have wanted to see them.