Complete 10r80 Auto Transmission Teardown

[craigaria]

They have been abusing the f150 10 speeds at the track too. Over 1000 hp and taking it too

Sponsored

 

[bsb78]

Cool video. Auto transmissions are still magic to me.

Must have let the little wizard that shifts gears for you out when the fluid drained everywhere

 

[smrpilot]

Works on the principles of P.F.M.
Pure *ucking Magic

 

[smrpilot]

How long is the assembly video?

 

[T Neil]

Good video for those who want to see the internals of these 10 speed transmissions.

Geez. Agree with other posts....not gonna do this.

Given the way that this was broken down....not sure how the rebuild would turn out It appeared to be just the second one he has done and there were parts everywhere. What’s the bet he ended up with 3 pats on the bench when assembly was completed?

Interesting that 2 clutch packs were fried. However, good news for bronco owners is that this trans was installed in a 700+ horse power application. At the horse power applications we will be running this transmission should be bullet proof.

 

[AzScorpion]

How long is the assembly video?

They're still trying to figure that one out.

 

[sledboy]

I do this for a living, should’ve had me do it for them!

You do what for a living? Make videos or rebuild transmissions? If you rebuild transmissions, give us your thoughts on the 10R80. Would love to hear your point of view!

 

[Wizard1183]

I own the GM version and it's been fantastic (44,000 miles). I assume you don't own one. Enjoy your Chinese manual.

I own a 6l80 and I’ll tell you right now that transmission is pure shit. 44k miles talk to me when your drive train warranty is out and then you’re buying a $6000 transmission.

Anyone can say I have a brand new something and it’s not giving me problems....tool

 

[jxc]

It's all ball bearings these days. He's going to need to prepare the Fetzer valve with some 3 in 1 oil and gauze pads.

 

[Deleted member 3063]

Not sure why yall are dogging the 10 speed. People are abusing the hell out of them on the dragstrip pushing way over 1000 hp and going into the 8 second zone and they are holding up well. Should be plenty strong enough for a bronco

Truth in that but, they didn't use it in the automatic only GT500, wonder why.
Never mind Hot Rod answered that.

https://www.hotrod.com/articles/wha...clutch-transmission-new-shelby-gt500-mustang/

 

[Dom]

That was a cool video! Loved every second of it. Thanks for sharing.

 

[Rednek]

I build transmissions for the Ford plant in sharonville Ohio and so I’m a bit biased.

I repair transmissions at a dealership level and i must say that you folks have stepped up build quality on these,the least problematic auto in years

 

[Aman]

Truth in that but, they didn't use it in the automatic only GT500, wonder why.
Never mind Hot Rod answered that.

https://www.hotrod.com/articles/wha...clutch-transmission-new-shelby-gt500-mustang/

You don't actually consider the DCT an automatic, do you?

 

[Bdisco]

It's all ball bearings these days. He's going to need to prepare the Fetzer valve with some 3 in 1 oil and gauze pads.

 

[Karl_in_Chicago]

Bout cracked a rib, the guy off camera singing along was hilarious. I loved this video.

And it's confirmed I will never EVER attempt to work on a transmission.

Wayyyy back when I saw an AT disassembled for the 1st time I said to myself I will never, ever do anything more complex with an AT than check the fill level with the dipstick. Anything more than that and I'm just some ape jumping around a black monolith.

Sponsored