I've read all 24 pages of this thread twice but I don't recall any discussion on which connector I need to buy to connect the pre-existing wires in our mid package Badlands to my new fog light compatible light switch.
Sponsored
If you cannot find those connectors (I believe someone did identify them, but they might take time to source/find) then just put new connectors in their place that mate with the ones on your fogs - that’s what I did. Nothing difficult about crimping and soldering weatherproof connectors (and get some shrink wrap on them as well)I've read all 24 pages of this thread twice but I don't recall any discussion on which connector I need to buy to connect the pre-existing wires in our mid package Badlands to my new fog light compatible light switch.
Do you have front parking sensors?I installed a set of @MandRautomotive fog lights this weekend and as I was, I looked for the factory fog wiring but did not see it. I have a 4dr Badlands with mid package, mod bumper, and Sasquatch.
Does anyone with a the same vehicle know where to find it?
Mid pkg trucks don't have the sensor and foglight wiring there. I had the same problem when I did mine.I installed a set of @MandRautomotive fog lights this weekend and as I was, I looked for the factory fog wiring but did not see it. I have a 4dr Badlands with mid package, mod bumper, and Sasquatch.
Does anyone with a the same vehicle know where to find it?
Thank you. Did you make a post on how you made it all work? Did you buy a new OEM light switch? My experience with automotive wiring consists of running these fog lights ot the aux switch wiring lol.Mid pkg trucks don't have the sensor and foglight wiring there. I had the same problem when I did mine.
I haven’t kept up with this thread. Last I saw someone located the C192 - but, has anyone wired them up from there? I’m in the same boat.Thank you. Did you make a post on how you made it all work? Did you buy a new OEM light switch? My experience with automotive wiring consists of running these fog lights ot the aux switch wiring lol.
Good luck!Got the switch ordered finally. Now the wait!
I did the same thing, used the aux switches. But with the fogs, driving, and backlight circuits, I'd like to move the fogs and backlight off and trigger them with the factory switch.Thank you. Did you make a post on how you made it all work? Did you buy a new OEM light switch? My experience with automotive wiring consists of running these fog lights ot the aux switch wiring lol.
Are you sure it is C210 you are looking for?Who was the user on this thread with the Ford service data access? Schematics?
Wondering if he/she can locate connect c210. Likely drivers side mirror area? Ambient temp sensor.
Yeah I think maybe C210 is what people are tapping into for power to trailer wiring harness in the cargo area.Are you sure it is C210 you are looking for?
Yeah, according to the service diagnostics performed by the dealer. They thought they fixed the temp sensor with a loose plug but nope...Are you sure it is C210 you are looking for?
I had a factory switch with fog light ordered but when I found out there wasn't pre-existing wires, I canceled the order. I'm not knowledgeable enough about automotive wiring to figure it out myself lol. If someone comes up with a solution, I'll consider reordering.I did the same thing, used the aux switches. But with the fogs, driving, and backlight circuits, I'd like to move the fogs and backlight off and trigger them with the factory switch.
I did buy a factory fog switch unit, but that was before I found out the front harness was not installed I need tospend some time to move the battery and fuse box to locate C203 connector and see if the feed for the fogs is there.