Floor mats for full rubberized floor.

[Fordified1]

What floor mats properly fit the rubberized floor in a Black Diamond? I didn’t order mats with my build.

Sponsored

 

[BD6G]

What floor mats properly fit the rubberized floor in a Black Diamond? I didn’t order mats with my build.

I’ve only personally used the OEM all weather mats in my Black Diamond and now in my Everglades. They work well and fit well. Both the mats and the floor are easy to clean so didn’t need to go with a Husky or Weathertech option. It’s more to prevent heel wear in the wash out floor than anything for me.

 

[kr_1315]

I have Husky mats. They fit perfect after I snipped off the nubs on the back. Took about 10 minutes with a small diagonal cutter. That's the best option in my opinion. Certainly fit better than Weathertech, and offer more coverage then OEM.

 

[WheresMyBronco]

I have the Weathertech mats and don't recommend the rear seat mats if you have a 4 door. They front pair fit well but the rear piece is pretty sloppy IMO. Definitely disappointed since they tend to fit well on everything else I've gotten them for.

 

[Roger123]

I vote for OEM, we have them, and they fit perfectly and provide good coverage.

 

[HolidayDog]

I bought the Maxzina full set for the 4 door. First row, second row and cargo space with covers for the carpet seat backs of the second row. These will go in my 24 Everglades. Not sure how the cargo mat will fit with the slide out tailgate.

I’ll try to report how they fit after I take delivery.

I chose the “open box” option on Amazon and they whole set was $130 I think.

 

[cbrenthus]

OEM carpet mats fit nicely.

I went with OEM floor liners, but there are 2 part numbers - one for carpeted floors that has rubber spikes all over the bottom and one for the rubberized floor that doesn't have spikes. I didn't know this, and neither did my dealer's parts department, until after I received the spiked ones, but they let me exchange them

 

[broadicustomworks]

I have a set of aftermarket front and rear rubber mats I'll Give you if you want to pay shipping.
They fit well and perform well, I just liked my factory ones better.
They are the 3W liners.

 

[Fordified1]

I have a set of aftermarket front and rear rubber mats I'll Give you if you want to pay shipping.
They fit well and perform well, I just liked my factory ones better.
They are the 3W liners.

PM sent. Thanks!!!

 

[JJHTX]

Another vote for the OEM all weather mats.

 

[BigBlue7]

Another vote for the OEM liners

Just make sure to order the ones that go with the washout floors

 

[Fordified1]

Still making the final trade-in deal on my new BD. Any of y’all know what the part number is for the correct mats for the 4dr wash out floor? Gonna try to get them thrown in the deal or at dealer cost.

 

[BigBlue7]

Still making the final trade-in deal on my new BD. Any of y’all know what the part number is for the correct mats for the 4dr wash out floor? Gonna try to get them thrown in the deal or at dealer cost.

SKU: M2DZ7813300BA
https://accessories.ford.com/bronco-4dr-2021-floor-liner-for-vinyl-flooring

 

[lapazleo]

Oem

 

[GroovyGeek]

I have the OEM but am disappointed with their fit. They peel away from the cabin walls easily, which is particularly bothersome around the dead man pedal.

If I were doing it all over again I would try the 3W solution, which seems like a good compromise between the budget oriented Maxima/Mabett etc (which IMO are too flimsy) and the high end Husky (which I am not inclined to pay for). People don't like the logos on the 3W. For me personally it is on the floor and I never see it I would not care. And if I did I can always use a black permanent marker to tone it down.

If I could sell my OEM mats for a reasonable price I would get the 3W ones. But I can't so I am holding my nose and sticking with OEM.

Sponsored