Fogs and High Beams?

[22MavXLT]

Is it possible to have the fogs stay on when you switch your high beams on? Does FORScan support that or no?

Sponsored

 

[cbrenthus]

Yes, there is a setting in Forscan to do this and it works. I don't know it off the top of my head, but check the spreadsheet - it is in there. I have verified it by both the fog light icon staying on with highs on the dash, and sitting on front of an empty store in a plaza and turning my highs on and off.

 

[Step]

I was wondering the same thing.

 

[ColonelAngus]

Not sure on the bronco but i think i saw it as an option when i was messing with my f-150. Just keep in mind that its not legal in the US unless theyve changed that law, so you may run in to inspection issues. Also if you're running OEM fogs, there isn't really a benefit to having them on with high's

 

[Garemlin]

That’s called Bambi mode and I believe it can be done in FORSCAN. I remember years ago when I had a 2001 Focus. You could do the same by adding a simple jumper in the fuse box. Simpler times. lol

 

[GI_Jo_Nathan]

That’s called Bambi mode and I believe it can be done in FORSCAN. I remember years ago when I had a 2001 Focus. You could do the same by adding a simple jumper in the fuse box. Simpler times. lol

Yep! On my 2001 Ranger there was a tab you could bend on a relay thst would do it too!
On my 2012 focus I used FORSCAN to do it.

 

[22OBX]

Yep, I did the change using Forscan. No other way to have them on with high beam.

 

[Sparkherd]

That’s called Bambi mode and I believe it can be done in FORSCAN. I remember years ago when I had a 2001 Focus. You could do the same by adding a simple jumper in the fuse box. Simpler times. lol

"Brown wire mod"
Did dat on my 2010 Ranger.

 

[22MavXLT]

I am computer illiterate to say the least, anybody close to me willing to do it and me pay ya?

 

[cbrenthus]

I am computer illiterate to say the least, anybody close to me willing to do it and me pay ya?

I might be going to Charlotte in a month or so, if you don't have it done by then we could figure something out.

 

[22MavXLT]

Heck yeah, that sounds good. Just let me know. Thank you!

 

[evgenyvasenev]

Yep, fixed it with Forscan.

 

[Lèòn]

Is it possible to have the fogs stay on when you switch your high beams on? Does FORScan support that or no?

If you got them wired to the aux switches

Sponsored