Goose gear tailgate table installed!

[Losy]

Thanks for the pics. Let us know how it does off road.

Sponsored

 

[FreshKsig]

*too

 

[drive21bronco]

Everyone complaining about the price or surprised by it is hilarious. Some of you are comparing tables that are half the price but 1/3rd the quality. That means YOU are paying to much. This table is made with stainless steel twice the thickness of the sheet metal ones, no wires for to hold it up, the latches alone are probably 25-35 bucks each if you were to purchase by themselves. I paid 55k for this Bronco and waited over a year, I am not going to go cheap on the upgrades or accesories now. I have a harder time paying over 200 bucks for a flat plate to mount an ARB compressor under the hood. Now THAT is ridiculous. Bottom line, offroading is not a cheap hobby, but I am coming from racing Ultra4 and own a powerboat so everything is cheap for these things! LOL

I agree , part of the reason I fabricated my own arb mount. (To save money for things I cannot fabricate myself). I can see myself buying this table, just need to save up a bit.

 

[etmccaus86]

Yea not on their site but someone installed it, I captured the pictures from his post because I was going that route, looks like it fits fine :-/

Do you remember whose post it was?
Just received one to install and was curious if he used spacers to clear that rib in the door...

 

[Jhuff]

Do you remember whose post it was?
Just received one to install and was curious if he used spacers to clear that rib in the door...

I have the same question... I searched and searched, but he either didn't mention the name of the table in his post or it was deleted for some reason.

This is the only table I've seen/confirmed that won't interfere with my drawer system (being made as we speak) when both are open. Looks like it is thin enough that it can be installed super-low, in the gap between the tailgate and cargo area moulding.

 

[etmccaus86]

I have the same question... I searched and searched, but he either didn't mention the name of the table in his post or it was deleted for some reason.

This is the only table I've seen/confirmed that won't interfere with my drawer system (being made as we speak) when both are open. Looks like it is thin enough that it can be installed super-low, in the gap between the tailgate and cargo area moulding.

Never found it...wound up winging it. Ain't pretty or fully square but it's now level and works

 

[chobit]

$529.00?!?!?!?! Looks like this is going to have to work for me......

I had the front runner on my JLU which also has the slide out cutting board, and no rattle, I wish they have one for the Bronco, as it's only $200 on the JL.
https://www.frontrunneroutfitters.com/en/us/drop-down-tailgate-table.html

 

[FellowM3]

Anyone know the weight capacity of the goose gear tailgate table?

Looking between this and the trailgater. I see the trailgater is 50lb

Anyone with the trailgater have any updates on if it rattles? The one thing i liked about the GG is that they have some foam strips that will quiet everything.

Also, FYI the GG went up another $40...

 

[rtazz17]

Its well worth the price! Build quality is on point. I don't want some cheap ass piece of thin sheet metal rattling around back there. You get what you pay for.

Idk,I would turn that around and say you didnt get what you paid for. Way overpriced. Paid for a name

 

[prospectfour]

Idk,I would turn that around and say you didnt get what you paid for. Way overpriced. Paid for a name

Agree, I'm waiting on most accessories until the early adopter tax comes down. When Broncos become as common as Wranglers these accessories will be commoditized. Remember, for every Yeti there's several RTIC's. There will only be more manufacturers of these tables over time, don't forget they are just pieces of wood and metal.

Edit: I find it funny B6G is allergic to ADM but when it comes to accessories it's "you pay to play"

 

[F OR D]

imo these are great, and don't require a bronco to use. packs down, can take to a campsite, and most are under $50.

i also feel like with the swing of the door, hitch and rack, etc. makes a tailgate table more difficult to use and one dimensional.

 

[4x4TruckLEDs.com]

Everyone complaining about the price or surprised by it is hilarious. Some of you are comparing tables that are half the price but 1/3rd the quality. That means YOU are paying to much. This table is made with stainless steel twice the thickness of the sheet metal ones, no wires for to hold it up, the latches alone are probably 25-35 bucks each if you were to purchase by themselves. I paid 55k for this Bronco and waited over a year, I am not going to go cheap on the upgrades or accesories now. I have a harder time paying over 200 bucks for a flat plate to mount an ARB compressor under the hood. Now THAT is ridiculous. Bottom line, offroading is not a cheap hobby, but I am coming from racing Ultra4 and own a powerboat so everything is cheap for these things! LOL

You realize our ARB Compressor Mount is 10 gauge STAINLESS STEEL. It's then powder coated. 10 gauge stainless is EXPENSIVEEEEEEEEEEEEEEEEEEE but it's friggin ROCK SOLID. It's not some cheap over-seas regular steel that will rust. Made in a union metal fabrication shop here on Long Island

But I agree with you on the comments regarding the Goose Gear Table. YEAH it's 2-3x the price of other tables but it's ROCK SOLID. It's very strudy, VERY durable, doesn't wobble at all and is amazing. We install them all the time at the shop because people who want one understand quality costs money

 

[AlexInSD]

Received my Goose gear tailgate table yesterday and just got done installing it. Incredibly easy and this thing is beautiful. Well worth the money and wait. Anyone on the fence I would recommend getting one. Took 20mins to install.

Hi - grats on the table. Question: How much weight does the slide out cutting board hold? Does it flex much?

 

[Tcarp1]

Hi - grats on the table. Question: How much weight does the slide out cutting board hold? Does it flex much?

Its fairly solid. I am not sure on an exact weight though.

 

[4x4TruckLEDs.com]

Everyone complaining about the price or surprised by it is hilarious. Some of you are comparing tables that are half the price but 1/3rd the quality. That means YOU are paying to much. This table is made with stainless steel twice the thickness of the sheet metal ones, no wires for to hold it up, the latches alone are probably 25-35 bucks each if you were to purchase by themselves. I paid 55k for this Bronco and waited over a year, I am not going to go cheap on the upgrades or accesories now. I have a harder time paying over 200 bucks for a flat plate to mount an ARB compressor under the hood. Now THAT is ridiculous. Bottom line, offroading is not a cheap hobby, but I am coming from racing Ultra4 and own a powerboat so everything is cheap for these things! LOL

Ouch, shots fired Our mount is the price it is for the same reason you just defended the goose-gear table. Stainless steel.... 10 gauge thick

Sponsored