- First Name
- TrailRax
- Joined
- Nov 3, 2021
- Threads
- 26
- Messages
- 740
- Reaction score
- 1,548
- Location
- Woods Cross, Utah
- Website
- www.trailrax.com
- Vehicle(s)
- 2023 Bronco Badlands
- Your Bronco Model
- Badlands
We rate the half rack at 150 pounds dynamic and 300 pounds static evenly distributed. That being said, we do not recommend mounting an RTT to the half rack. We only recommend mounting tents to the full rack because it has the extra support of the windshield mounting brackets. These tie into the studs under the caps at the top of your windshield that say "accessory ready"!Ok, I didnt realize the tent opened to the side! So since its a matter of inches, and I was guessing the overhangs, the rain stopped and i went out and measured the overhang. You have about 26.5" of span from the outer edge of the two brackets. And if the tent opens off to the side, and its only 48" wide, thats 6" overhang front and back of the rack. It you used the side saddles for additional capacity . . . Email @TrailRax and ask the weight capacity of the half-rack with the PakRax side-brackets installed. The downside is no place to put the mid-panel (I put mine on the half-rack). I think I might do a tent like yours if the weight capacity was adequate . . . Your tent would prevent the 2row skyrider from opening, but the one-row skyrider would work great in that application, perhaps.
Whats the name of your tent?
Sponsored