Lower Control Arm Cam Alignment Pins

[Wildtrak'n]

These are the pins that worked for me, vs the shorter one because the back part of the pin was flat vs the shorter one was domed. After installing these I trimmed them to match the oem lenght.

Sponsored

 

[Elevator Man]

These are the pins that worked for me, vs the shorter one because the back part of the pin was flat vs the shorter one was domed. After installing these I trimmed them to match the oem lenght.

Where did you get them from?

 

[Wildtrak'n]

Where did you get them from?

they are available from SPC alignment and Summit Racing but I ordered them from Amazon

 

[kodiakisland]

How did you press them in?

 

[Wildtrak'n]

How did you press them in?

removed the lower control arm, used a C clamp and a socket to press them in, no issues

 

[NORCALGXP]

@Elevator Man @Wildtrak'n
Excellent thread, need to replace about eight of my cam pins. Just damaged from wheeling. Ordered the SPC's.

 

[Oldhippie]

This won’t help finding/replacing pin but may help not bending new ones?
https://bds-suspension.com/products...MIv9mggoWlhgMVRIRaBR3vLwzqEAQYGiABEgJh4PD_BwE

 

[NORCALGXP]

This won’t help finding/replacing pin but may help not bending new ones?
https://bds-suspension.com/products...MIv9mggoWlhgMVRIRaBR3vLwzqEAQYGiABEgJh4PD_BwE

Thank you for the link. I started checking these out and found Zone Offroads with the same thing. Not sure which one I will go with but my camber alignment pins are bent or missing. I like the idea of having two points that hold the cam in place. I wheel hard and each time almost driving home the alignment is way off from the cam moving.

https://zoneoffroad.com/products/fo...nco-cam-lockout-plates?variant=41615233089624

Sponsored