Mabett Mud Flaps Fits Sasquatch set that accommodates factory rock rails or tube steps

[Mabett]

This will fit non Sasquatch four door right?

yes

Sponsored

 

[orion1224]

Wait. What?

Are the "fits Sasquatch" mud flaps incompatible with 35" tires?

How can that be when every Sasquatch comes with 35" tires?

Mine arrive Saturday... and I have a Sasquatch. More info, please?

They work great on my Sasquatch with 35s. No rubbing. I only installed the fronts as I don’t want them in back for now.

 

[Mabett]

@Mabett ; You should make a 'Front only' option for those who dont want to buy the rear mud flaps.

i will

 

[Mabett]

Wait. What?

Are the "fits Sasquatch" mud flaps incompatible with 35" tires?

How can that be when every Sasquatch comes with 35" tires?

Mine arrive Saturday... and I have a Sasquatch. More info, please?

No, I didn't notice that the 35" tires were included in the SAS package, I take back what I said because the first person who helped me with the test didn't collide with the tires

 

[66GT]

No, I didn't notice that the 35" tires were included in the SAS package, I take back what I said because the first person who helped me with the test didn't collide with the tires

Ok. So now what?

Do I install them just to find out they rub?

... or do I just return them in the packaging and look for something else?

Ugh.

 

[Mabett]

Ok. So now what?

Do I install them just to find out they rub?

... or do I just return them in the packaging and look for something else?

Ugh.

I would tell people to keep installing because in my tests there was no friction, if it keeps happening I will explain in my link and figure out a way to fix the friction

 

[Keerplunk]

I just wanted to clarify, will these fit without rub on a standard SAS with the stock 35’s? I watched the previous video and the tires look more aggressive than the Terrains on the stock SAS? I was planning on installing this weekend but will probably pass if there’s rub. Thanks for any info.

You should be fine, I have aftermarket wheels and NO lift (Non SaS) I will have the lift installed tomorrow so I will see if that resolves the issue. If you are SaS and stock wheels then I bet you have no issue!

Don't let my Video dissuade you I have a non standard set up.

 

[Keerplunk]

Wait. What?

Are the "fits Sasquatch" mud flaps incompatible with 35" tires?

How can that be when every Sasquatch comes with 35" tires?

Mine arrive Saturday... and I have a Sasquatch. More info, please?

MY Bronco is NON SaS Geez I think I stirred up a S**T storm by accident. I am on stock Big Bend Height with 8.5 Inch wide 17" wheels with -10 offset. My wheels poke a lot more than the SaS wheels I think the Sas guys an girls should be fine.

 

[Keerplunk]

Ok. So now what?

Do I install them just to find out they rub?

... or do I just return them in the packaging and look for something else?

Ugh.

If you have factory Sas then you should have no issue. I was commenting about stock height with 35" NON SaS

 

[Mabett]

MY Bronco is NON SaS Geez I think I stirred up a S**T storm by accident. I am on stock Big Bend Height with 8.5 Inch wide 17" wheels with -10 offset. My wheels poke a lot more than the SaS wheels I think the Sas guys an girls should be fine.

thank you for the explanation

 

[66GT]

If you have factory Sas then you should have no issue. I was commenting about stock height with 35" NON SaS

Ah. Ok. Happy again.

Why the hell does everything "Bronco" have to come with a dozen damn caveats? ‍

 

[Keerplunk]

Ah. Ok. Happy again.

Why the hell does everything "Bronco" have to come with a dozen damn caveats? ‍

Im building mine backwards! Wheels, then Tires, Then Lift!

 

[Rootdog]

Great. Thanks for clarifying. Can’t wait to install!

 

[derichio02]

So I had to abort my install. I have 35” BFG KO2’s on my wildtrak SAS suspension. My wheels are aftermarket and have a 0 offset. Full on contact at 3/4 Turn on both sides. Looks like these may work with a stock SAS setup but lots of folks, including myself, go for 0 or a negative offset and no way will these work.

I didn’t take a pic but the tires hit the honey comb pattern on the back of the flap. If these were flatter on the inside by a half inch it would likely clear

Gonna save and install on my wife’s Outer Banks non SAS this weekend.

 

[MikeG]

Just installed the driver's side... looks great. I'm having a lot of difficulty getting the expansion screw + nut removed... and somewhat hard to get the one back in that attaches to the mud flap. Does anyone have advice/trick for how to get them out more easily? Mine just turn and never unscrew.

I was having a similar issue getting them out, you need a small tool you can insert between the screw part and the outer ring to help it catch the threads. I used a tiny screwdriver. See this video, it helps explain it.

Sponsored