- First Name
- Mike
- Joined
- Jan 28, 2023
- Threads
- 2
- Messages
- 55
- Reaction score
- 194
- Location
- Ontario Canada
- Vehicle(s)
- 2022 2 door Bronco Big Bend Advanced/Sasquatch 2.3
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Hi folks. I installed the Ford Performance tune last night which went smoothly and the Bronco is like a new animal! Unfortunately, this morning I decided to check out the tire size using the procal and after I corrected it to the right size for the Sasquatch tires I'm getting service 4x4 code and a reduced power alert in the Ford Pass app.
I did enter the tire size about 3 times as it wasn't clear when the procedure was actually done. My question is what to do about the codes? Should I revert back to the stock tune then do it again? I did manage to change the tire size and save it.
If I cleared the codes does that "fix" the issues? The Bronco still seems to drive fine. Any advice would be much appreciated!
I did enter the tire size about 3 times as it wasn't clear when the procedure was actually done. My question is what to do about the codes? Should I revert back to the stock tune then do it again? I did manage to change the tire size and save it.
If I cleared the codes does that "fix" the issues? The Bronco still seems to drive fine. Any advice would be much appreciated!
Sponsored
Last edited: