- Thread starter
- #1
Looking for pics of Outerbanks with stock Badland wheels and SAS wheels.
Will both bolt on with no mods to a stock outerbanks?
Will both bolt on with no mods to a stock outerbanks?
Sponsored
Sponsored
Here is a before and after of my OBX. I put a 2 inch lift on it and found a set of SAS rims. I kept the same tire diameter so I wouldn't need to mess with the speedo. I didn't need to remove the crash bars. Hope this helps.
- First Name
- Brad
- Joined
- Jun 13, 2022
- Threads
- 26
- Messages
- 1,336
- Reaction score
- 2,066
- Location
- Chandler, AZ
- Vehicle(s)
- 2022 Ford Bronco
- Your Bronco Model
- Outer Banks
Not exactly sure which photo you're looking for, as your title and post seem to conflict, but here is my OBX SAS.
Here's a pic of my friends OB w/ my non-squatch wheels w/ 35 x 10.5s after I upgraded to 37s. No lift on the OB, just removed the crash bars.
Sponsored
- First Name
- Stanley
- Joined
- May 3, 2021
- Threads
- 3
- Messages
- 37
- Reaction score
- 48
- Location
- Springfield, VA
- Vehicle(s)
- Bronco, Mountaineer, Mustang
- Your Bronco Model
- Outer Banks
OBX with Badlands wheels and tires. Looks much better.
Many have slapped the squatch wheels and tires on and just removed the crash bars, no lift. They will fit but most likely will rub once you leave the pavement. IMO, if you plan to wheel, you should do at least a level lift (2" in the front, 1" in the rear) via perch collars or find a set of BL non-squatch take off coilovers.
With the Badlands and Badlands Optional Wheels are just fit right on without any modification nor remove crash bar. Both wheels use same size tires.
Sponsored
Whats the poke like on these?OBX with Badlands wheels and tires. Looks much better.
- First Name
- Stanley
- Joined
- May 3, 2021
- Threads
- 3
- Messages
- 37
- Reaction score
- 48
- Location
- Springfield, VA
- Vehicle(s)
- Bronco, Mountaineer, Mustang
- Your Bronco Model
- Outer Banks
None. They are pretty much flush with the fender flares. The back set is the same as the standard outer Banks wheels. -55.
- First Name
- Stanley
- Joined
- May 3, 2021
- Threads
- 3
- Messages
- 37
- Reaction score
- 48
- Location
- Springfield, VA
- Vehicle(s)
- Bronco, Mountaineer, Mustang
- Your Bronco Model
- Outer Banks
Yes. 285/70/17 BFG. I got them from a guy that bought his Badlands, drove it home 20 miles, took the wheels and tires off and replaced them with ones he had pre-purchased. I didn't really have a problem with the Outer Banks factory wheels, just their size. I wanted a 17 inch wheel to allow more sidewall for airing down and an 8-in width instead of 7.5 opened up a greater variety of optional tire upgrades.
Oh okay, i wasn't sure. Unpopular opinion, but i hate the poke... lol just my opinion.
I want to find a pair of local badlands take offs to get powder coated black.
Those wheels look great on a stock OBX
Sponsored
