Purchase HOSS 3.0 Suspension

[BroncoRuss]

It would provide a little lift over a non-sas suspension, yes. It's about the same height as the sasquatch suspension, which is a little higher than non-sas.

In case you were still wondering. Made the swap. Same spec as you. Awesome upgrade. Had my shop measure the lift those numbers are at the top right. About 2” in the front and 1” in the back. I’m sure it’s settled some since then as well.

Sponsored

 

[Herewegoagain]

Hello

My Bronco is sasquatch with the HOSS 2.0. In the past, I've drove a Wildtrak with the HOSS 3.0 setup for a while and really liked it.

Is it possible to purchase the springs/shocks from the HOSS 3.0 setup? I assume it would be a fairly easy swap, but I'm wondering where to get the parts. Has anyone done this?

Why would I replace Ford junk with more Ford junk ????? Makes no sense !

 

[Brian_B]

Why would I replace Ford junk with more Ford junk ????? Makes no sense !

Because it's not Ford, it's Fox?

 

[Herewegoagain]

Because it's not Ford, it's Fox?

Just like the so called bilsteins. To each his own. When I replace mine it will be with the real thing

 

[KT_bronco]

Just like the so called bilsteins. To each his own. When I replace mine it will be with the real thing

By this logic the fox’s adaptive shocks on the raptors aren’t real either. Bizarre take.

 

[23OBX2.7]

In my experience the Ford and FP are excelent in fumction, fit amd durability prese ting the lowest risk and highest value options untill one syards packi g on hundreds of lbs of accessries and wheels etc.

In this case buy the best you can afford, get a fully loaded front and rear axle weight for the suspension tuning guys amd hand it over to them along wih your use case.

Sponsored