Quake LED Releases Ford Bronco Trail Sight Delete DRL Kit w/ Sequential Turn Signal and RGB Accenting QTE1199!

[jh3113]

These are sick! Also really like the Trail Sights though, so something integrated would be more down my alley

Sponsored

 

[Bruno]

is there a Trail Sight Delete "PLATE" - just a black filler or body color filler plate?

 

[AKBronc49]

I like them! I do really like the trailsights but I like lights more.

 

[HotdogThud]

I'm trusting that there's no way to be able to set different colors to each side?

...like, say....red on one side and blue on the other?

 

[Ground_zero298]

I'm trusting that there's no way to be able to set different colors to each side?

...like, say....red on one side and blue on the other?

If you ran 2 control boxes you probably could.

 

[2020FordRaptor]

HIGH DEMAND PRODUCT. FIRST COME, FIRST SERVED. PLEASE EXPECT POSSIBLE 2 WEEK DELAY.

ATTENTION BRONCO OWNERS!!!

Don’t use your Trail Sight or always thought it would look better deleted and be way safer with DRL and Sequential Turn Signals? Quake LED is proud to introduce our “First to Market” flush-mounted Tempest Series - Ford Bronco Trail Sight Delete Kit with DRL, Switch-back Sequential Turns and RGB Accenting!

These premium UV resistant Smoked Black lens DRLs feature a crisp white DRL that give a very sleek look, while our signature Tri-Phase Sequential Turn Signals inform on-coming vehicles that you are turning.

Check them out in action here:

With a complete DOT/SAE/ECE compliant, plug and play installation with built in anti-flicker resistors and easy to follow instructions, LED offers a construction and quality that is built to last. Go ahead and replace your stock 2021+ Ford Bronco Trail Sight!

Order model# QTE1192 today!
• COMPATIBLE with full sized Ford Broncos!
• PLUG and PLAY no splicing or wiring required!
• ALL Components included!

Trail Sight Delete Features:
• Function – DRL, Sequential Turn Signals & RGB Accenting
• Perfectly follows body for that flawless look
• No dash errors or hyper-flashing
• Watts – 3W DRL, 1.5W Turns & 3W RGB per side
• Current: DRL – 0.2A @12VDC per side
• Current: Turns – 0.1A @12VDC per side
• Current: RGB – 0.2A @12VDC per side
• Diodes – SMD 3528pcs LED
• Color Temp – 6,000K (DRL)
• Lens Material – Thick Polycarbonate
• Lens Color – Smoked Black
• IP66 Waterproof Rating
• Operating Voltage - 12V DC
• Operating Temp -40 to 140 degrees F
• Life Span Expectancy - 50,000 Hours
• Compliant: DOT/SAE/ECE
• Weight: 3.5lbs/set
• Size: 14 x 0.75 Inch

Fitment:
• 2021+ Ford Bronco with Factory Halogen Headlights (Base Tier)
• 2021+ Ford Bronco with Factory LED Headlights (High Tier)
• Will not fit Bronco Sport

Included In the Box:
• Fully Assembled Driver and Passenger Trail Delete DRLs
• RGB Wires, Y Splitter and Controller
• Instructions

Very neat. What would be awesome is if you guys didn't make a delete, but a trail sight that is LED. Off roading at night would be a lot easier.

 

[TheKim]

is there a Trail Sight Delete "PLATE" - just a black filler or body color filler plate?

Yeah, and they're $385

https://www.bronco6g.com/forum/threads/bronco-trail-sight-delete-–-test-fitting.36266/

 

[Lowcountry Bronco]

They should make a trail sight light that isn't a delete too! Cool to have the turn signal and lights on the standard looking trail sight

Never understood the purpose of these but sure, that'd look cool:

 

[4avor8ntfair]

HIGH DEMAND PRODUCT. FIRST COME, FIRST SERVED. PLEASE EXPECT POSSIBLE 2 WEEK DELAY.

ATTENTION BRONCO OWNERS!!!

Don’t use your Trail Sight or always thought it would look better deleted and be way safer with DRL and Sequential Turn Signals? Quake LED is proud to introduce our “First to Market” flush-mounted Tempest Series - Ford Bronco Trail Sight Delete Kit with DRL, Switch-back Sequential Turns and RGB Accenting!

These premium UV resistant Smoked Black lens DRLs feature a crisp white DRL that give a very sleek look, while our signature Tri-Phase Sequential Turn Signals inform on-coming vehicles that you are turning.

Check them out in action here:

With a complete DOT/SAE/ECE compliant, plug and play installation with built in anti-flicker resistors and easy to follow instructions, LED offers a construction and quality that is built to last. Go ahead and replace your stock 2021+ Ford Bronco Trail Sight!

Order model# QTE1192 today!
• COMPATIBLE with full sized Ford Broncos!
• PLUG and PLAY no splicing or wiring required!
• ALL Components included!

Trail Sight Delete Features:
• Function – DRL, Sequential Turn Signals & RGB Accenting
• Perfectly follows body for that flawless look
• No dash errors or hyper-flashing
• Watts – 3W DRL, 1.5W Turns & 3W RGB per side
• Current: DRL – 0.2A @12VDC per side
• Current: Turns – 0.1A @12VDC per side
• Current: RGB – 0.2A @12VDC per side
• Diodes – SMD 3528pcs LED
• Color Temp – 6,000K (DRL)
• Lens Material – Thick Polycarbonate
• Lens Color – Smoked Black
• IP66 Waterproof Rating
• Operating Voltage - 12V DC
• Operating Temp -40 to 140 degrees F
• Life Span Expectancy - 50,000 Hours
• Compliant: DOT/SAE/ECE
• Weight: 3.5lbs/set
• Size: 14 x 0.75 Inch

Fitment:
• 2021+ Ford Bronco with Factory Halogen Headlights (Base Tier)
• 2021+ Ford Bronco with Factory LED Headlights (High Tier)
• Will not fit Bronco Sport

Included In the Box:
• Fully Assembled Driver and Passenger Trail Delete DRLs
• RGB Wires, Y Splitter and Controller
• Instructions

I really like this product, but I don’t want to remove my trail sights…I just got some limb risers

 

[Jr87mustang]

is there a Trail Sight Delete "PLATE" - just a black filler or body color filler plate?

DeeZee has had one in the works for a long bit.
https://www.deezee.com/product/fender-hood-delete/

 

[Lèòn]

I like how the trail sights look. Part of the bronco. Imo.

Exactly. I do wanna rgbw+turn signal kit though

 

[breezyxm]

HIGH DEMAND PRODUCT. FIRST COME, FIRST SERVED. PLEASE EXPECT POSSIBLE 2 WEEK DELAY.

ATTENTION BRONCO OWNERS!!!

Don’t use your Trail Sight or always thought it would look better deleted and be way safer with DRL and Sequential Turn Signals? Quake LED is proud to introduce our “First to Market” flush-mounted Tempest Series - Ford Bronco Trail Sight Delete Kit with DRL, Switch-back Sequential Turns and RGB Accenting!

These premium UV resistant Smoked Black lens DRLs feature a crisp white DRL that give a very sleek look, while our signature Tri-Phase Sequential Turn Signals inform on-coming vehicles that you are turning.

Check them out in action here:

With a complete DOT/SAE/ECE compliant, plug and play installation with built in anti-flicker resistors and easy to follow instructions, LED offers a construction and quality that is built to last. Go ahead and replace your stock 2021+ Ford Bronco Trail Sight!

Order model# QTE1192 today!
• COMPATIBLE with full sized Ford Broncos!
• PLUG and PLAY no splicing or wiring required!
• ALL Components included!

Trail Sight Delete Features:
• Function – DRL, Sequential Turn Signals & RGB Accenting
• Perfectly follows body for that flawless look
• No dash errors or hyper-flashing
• Watts – 3W DRL, 1.5W Turns & 3W RGB per side
• Current: DRL – 0.2A @12VDC per side
• Current: Turns – 0.1A @12VDC per side
• Current: RGB – 0.2A @12VDC per side
• Diodes – SMD 3528pcs LED
• Color Temp – 6,000K (DRL)
• Lens Material – Thick Polycarbonate
• Lens Color – Smoked Black
• IP66 Waterproof Rating
• Operating Voltage - 12V DC
• Operating Temp -40 to 140 degrees F
• Life Span Expectancy - 50,000 Hours
• Compliant: DOT/SAE/ECE
• Weight: 3.5lbs/set
• Size: 14 x 0.75 Inch

Fitment:
• 2021+ Ford Bronco with Factory Halogen Headlights (Base Tier)
• 2021+ Ford Bronco with Factory LED Headlights (High Tier)
• Will not fit Bronco Sport

Included In the Box:
• Fully Assembled Driver and Passenger Trail Delete DRLs
• RGB Wires, Y Splitter and Controller
• Instructions

ok now show me a video of how to install lol

 

[Quake LED]

" 2021+ Ford Bronco with Factory Halogen Headlights (Base Tier) "

This is incorrect. All Broncos including the Base have factory LED headlights. I have one of the cheapest Broncos you can get, and honestly I'm blown away how much much stuff it has.

You are right! I believe it is supposed to be referencing the halogen taillights that come on the three lower tier trim packages. I have sent off the information, so it should be updated soon!

The good thing is that it fits and works on ALL 6th Generation Ford Broncos!

 

[JaxGtc]

Appears lots of folks like the trail sights. Rather than delete the trail sights, someone should come up with a bolt on lighting product with similar functionality. That would not infringe on the patten, keeps the tie down, and adds some form of lighting (signal, indicator, bling, etc.).

 

[j_anderson]

I have said it before, someone needs to make a trail site or trail site delete with a turn signal indicator that faces back towards the driver like my classic car's fender mounted indicator

This is neat but to much for my taste. Needs to be a bit more subtle.

Sponsored