RCI Bronco Rock Sliders Are Here!

[RCI Offroad]

Hi guys, as you may know we just launched our Bronco Rock Sliders and they will start rolling off the line by the end of this week!

Why are they the best sliders available?
-Completely frame mounted design, transfers no load to the vulnerable rocker panels
-Large, flanged frame mounting plates provide unequalled strength and lifting capacity, plus they protect the bottom of the frame from damage
-Every component in the slider including the tube is laser cut and tabbed together for a perfect fit every time
-Standard DOM round tubing and 2" square is far stronger than the usual 1.75" HREW used by others.
-Usable as a step when paired with our dimpled tread plates
-Dual stage epoxy primer and textured black powder coat is done on our own OEM quality automated paint line
-Unbeatable value for the price


5Deg W/ Tread

5Deg W/ Tread

20Deg W/ Tread

5Deg no Tread

5Deg W/ Tread

5Deg no Tread

Tread stickout looking straing down from door

Pinch Seam Guards (Look great and add protection w/ or w/out sliders)

20Deg

20Deg

20Deg No Tread

20Deg No Tread

20Deg No Tread

20deg No Tread

20Deg No Tread

Sponsored

 

[DaBronCo33]

2-door too? Or only for 4D?

 

[sniffHound]

I like.

 

[Slyder]

2-door too? Or only for 4D?

4Dr only according to their website.

::Edit 4/6/2023::

Comment above no longer applies. There are 2Dr versions on their site.
https://rcimetalworks.com/product/2-door-rock-sliders-21-present-bronco/

 

[SubmarineNuke]

Where is it made? US Steel? What wall thickness? Is that 2” OD pipe?

 

[RCI Offroad]

Where is it made? US Steel? What wall thickness? Is that 2” OD pipe?

Our manufacturing is all done in Loveland, Colorado.

All steel, aluminum, tube, etc is domestic. DOM tube is 1.75" x .120 square tube is 2x2 x .120

 

[RCI Offroad]

2-door too? Or only for 4D?

We have already done a 3d scan on the 2dr and it is in design currently. Hope to launch those within the next 1-2 months.

 

[Saw4Fire]

2-door too? Or only for 4D?

The second to last picture shows a 2-door version, without a tread plate.

 

[Badlands77]

The second to last picture shows a 2-door version, without a tread plate.

They look like they are all on the same vehicle to me… 4 door

 

[cgv]

I assume those pictures are of the 5 degree sliders? Do you have any photos showing the 20 degree sliders?

 

[Snacktime]

Got pictures of how these mount to the frame? Looks like your using gas tank support bolts and the factory front bolt holes that some aftermarket skids use. How much do the deflect with a full weight of the vehicle on them?

 

[Ramble_Offroad]

Yaaaas. Finally some proper built sliders.

IMPO, these are the best we’ve seen yet. Well done @RCI Offroad , I look forward to purchasing a set of these if my 2door ever materializes.

 

[Saw4Fire]

They look like they are all on the same vehicle to me… 4 door

My mistake. The rear fender flare goes a long way into the rear door. I thought it was a two-door.
https://www.bronco6g.com/forum/attachments/bronco-slider-no-tread-2-jpg.394999/

 

[kodiakisland]

I assume those pictures are of the 5 degree sliders? Do you have any photos showing the 20 degree sliders?

I would also like to see the 20 degree sliders please.

Sponsored