Show me your broncos on 37’s…

[Black Wildtrak Bandit]

Eibach 2.0 coilovers (+3”)
ReadyLIFT UCA and rear track bar relo
ICON 20x10 Bandit wheels(-24 offset)
MT Legend EXPs 37x12.50
N-Fab steps for the Mrs.
Hammerbuilt tire carrier reinforcement

Ride quality is excellent, on and off road. Retained factory rake, as I do a lot of camping with a RTT and gear (BadAss tents roof rack, but changing to Trailrax soon).

Sponsored

 

[Panzer948]

Wildtrak Antimatter Blue on 37" K02s. Just waiting for me to come home....

Cool, are those lights mounted in your ram air intake? I am thinking of getting this same hood so curious what you did there! Nice build!

 

[Gtrekker]

I'm happy with the hood. Yes, I installed two LED strips on the 1/4" thick plastic angle bracket with gorilla tape to secure to the hood.

 

[23CarbonizedBadSas]

Here is my 2023 Badlands Sasquatch. Running Bilstein 6112 coilovers, installed JKS Max Tire Clearance Kit. Sitting

on 37-inch BFG KM3 MTs.

 

[tiltis23]

37x12.5 Ridge Grapplers,
4" Ready lift SST lift
Lock Off-road 20x9 Wheels

 

[Wildin]

Super late to the party, but here is my setup!
Air design fenders, 37x13.5, paired with 1.5” wheel spacers.

 

[Mikey1287]

 

[Shifts And Grins Fab]

ADS Suspension, Mickey Thompson 37/12.50/17 Baja Legend M/T, Method 0 offset wheels.

 

[mattymik]

Super late to the party, but here is my setup!
Air design fenders, 37x13.5, paired with 1.5” wheel spacers.

So sexy.

What lift do you have? And is this a Wildtrak?

Any rubbing issues, particularly when stuffed or at full lock?

I found a set of 37x13.5s on FB market at a great price but I was worried about clearance with all that width. I’m planning a 2.5” lift.

 

[cbrownabq]

37” KO2s, 2 inch front lift, 1 1/2 inch rear with redrilled lower shock mounts, traxk bar relocation bracket and 3/4 bora spacers on front. Works great.

 

[NoloBronco]

Followed Bradley’s footsteps and went with 37” BFG KM3s with the 1/4” wheel spacers on my Sasquatch Badlands.

So no rub with the crash bar mounts not removed? What spacers did you use?

This is a good look.

 

[Lak34ers]

Here is my 2023 Badlands Sasquatch. Running Bilstein 6112 coilovers, installed JKS Max Tire Clearance Kit. Sitting

on 37-inch BFG KM3 MTs.

Max setting 6 on the 6112s?

 

[Arokcrwlr]

Eibach coilovers
ICON UCAs
Rockjock upper/lower arms
BFG 37x12.50x17
Method 703, 0 offset

 

[Wildin]

So sexy.

What lift do you have? And is this a Wildtrak?

Any rubbing issues, particularly when stuffed or at full lock?

I found a set of 37x13.5s on FB market at a great price but I was worried about clearance with all that width. I’m planning a 2.5” lift.

Thank you, Mattymik!

It's a Wildtrak. I had a tough time finding a lift kit for the Hoss 3.0 setup, but I went with the RPG preload collars.

I'm running a 3” lift in the front and a 2-1/4” lift in the rear to level the car.

At first, there was some minor rubbing during full lock in reverse, and it got worse when I added the mudflaps. So I just ended up putting a tire clearance kit and it did the job for me.

Here's a list of mods I've done so far if you are interested;

• 3” front 2-1/4” rear perch collars by RPG offeoad
• 1-1/2” hub centric spacers by Borla
• 37x13.5 Nitto ridge grapplers
• Tire clearance kit by JKS
• Mudflaps XL long by ROKBLOKZ
• Tailgate reinforcement kit by IAG
• Air design fender flares

 

[AntiMatterSAS]

17x9 weld racing wheels -12offset
Bfg 37x12.5r17
Fox elite 2.5's coilovers

Sponsored