Turn Offroad | Aftermarket Hard Top NOW AVAILABLE

[FlyingBronco]

Doesn’t Ford sell a storage bag for the middle panel of the OEM top?
I wonder if that might work.
I have no idea how large that panel is.

Hmm, I’ll have to look into that. Thanks!

Sponsored

 

[Rd1103]

I'm Lot #4 and expected ship date is now 2/9
Excited to get it in and MORE THAN APPRECIATE the awesome communication by TOR. It's clear they care about their customers and want to deliver an exceptional product.

 

[redone17]

Hmm, I’ll have to look into that. Thanks!

Part #: VM2DZ54502H07A

 

[JediMcMuffin]

Lot #3 here, my install is 11A on 2/6

 

[pakrat]

A few more pics to show color, texture, latches, and interior.

 

[604Bronco]

A few more pics to show color, texture, latches, and interior.

How'd you find the latches to adjust? Pretty straight forward?

 

[pakrat]

How'd you find the latches to adjust? Pretty straight forward?

Very straightforward. Only issue is you need a 10mm wrench to open or close the set nut. Tight from the black finish. You have to hook the latch on but not close it the whole way so that it doesn’t spin while you are turning the nut. Or you could grab it with pliers but that could scratch it unless you use a towel. Hope that makes sense. It will when you get yours.

 

[NatureMan]

A few more pics to show color, texture, latches, and interior.

 

[American Sender]

Very straightforward. Only issue is you need a 10mm wrench to open or close the set nut. Tight from the black finish. You have to hook the latch on but not close it the whole way so that it doesn’t spin while you are turning the nut. Or you could grab it with pliers but that could scratch it unless you use a towel. Hope that makes sense. It will when you get yours.

I wonder what all the phillips head screws attach to. They appear to be a small size and have the force of the tight latches on them. A question for Todd would be if they screw only into the fiberglass shell and core layer and not a fitting/insert?

 

[604Bronco]

I wonder what the all the phillips head screws attach to. They appear to be a small size and have the force of the tight latches on them. A question for Todd would be if they screw only into the fiberglass shell and core layer and not a fitting/insert?

I was also curious what these are attached to. Must be some sort of piece in the hard top - I doubt these are just screwed directly into the top itself and that's all.

 

[SwissBronco]

For the haters of the latches, (i am not one, don't look up that much while driving), why not just 3D print a clean cover to hide them? Could even be something Funktional like a sunglasses holder or so.
I will do so, but my delivery is in May. So somebody should beet me to it.

That side profile Looks amazing.

 

[Kjbeggs]

Hmm, I’ll have to look into that. Thanks!

Couldn't find any dimensions, but here's the link on the ford Accessories site:
https://accessories.ford.com/bronco-4dr-2021-hardtop-roof-panels-mid-panel-1

@Mabett sells one too!
https://www.amazon.com/Mabett-Compatible-Accessories-Multi-Layer-Off-roading/dp/B0C4TCPDF6?th=1

 

[604Bronco]

Sad day... My top won't be delivered until Monday now - Thanks a lot, shipping company!

 

[Rd1103]

Sad day... My top won't be delivered until Monday now - Thanks a lot, shipping company!

It could be worse! You could be ignored by the other guy and given another false promise.

 

[604Bronco]

It could be worse! You could be ignored by the other guy and given another false promise.

That's very true. It's just disappointing as I was ready to install it this weekend and made plans to do so. Wish they'd deliver it on the weekend!

Sponsored