What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[zedster]

Put up a Harbor Freight hoist to lift off the roof.

Sponsored

 

[Johnny Mo]

Put up a Harbor Freight hoist to lift off the roof.

Would love to see the rest of the hoist setup - waiting on my Braptor delivery (hopefully within a couple weeks) to start building out my hoist.

 

[Bruinsfan]

Installed 4" Aux Beam 90 watt amber lights today. Running the wires for a clean install was the most time consuming. Although it was not necessary, I used most of the wiring harness with inline fuse and relay. I tied into aux #6 switch. For $80 from Amazon, I'm happy with the quality and IP67 rating. I also took the time to label the other aux leads under the hood.

 

[jdubby]

Have you used the brace offroad yet? if so, what are your thoughts on it?

 

[zedster]

Would love to see the rest of the hoist setup - waiting on my Braptor delivery (hopefully within a couple weeks) to start building out my hoist.

I pretty much followed what is in post #85 here:
https://www.bronco6g.com/forum/threads/homemade-hard-top-lift-tips.41759/page-6

 

[NoloBronco]

Swapped the Diode Dynamics out with a Baha kit from @4x4TruckLEDs.com.

Next up LP4’s on the A Pillars and LP6’s on the bumper.

 

[Joez60421]

After waiting for Powertanks 2 door mount to be released, was met with quite the disappointment when I saw that it wouldn't work with a Trektop. So, whipped up my own.

 

[4x4TruckLEDs.com]

Swapped the Diode Dynamics out with a Baha kit from @4x4TruckLEDs.com.

Next up LP4’s on the A Pillars and LP6’s on the bumper.

Solid choice!

 

[dejones64]

First camping trip with Esmeralda, and my sons.

 

[Grumpy]

Finally took time to add the black mesh inserts to my grille. These will do until I purchase a new Heritage grille.

Before

After

 

[Dino171]

Swapped the Diode Dynamics out with a Baha kit from @4x4TruckLEDs.com.

Next up LP4’s on the A Pillars and LP6’s on the bumper.

Looks amazing. May I ask why the switch from DD to DB lights? Torn between the two myself. Thanks.

 

[NoloBronco]

Looks amazing. May I ask why the switch from DD to DB lights? Torn between the two myself. Thanks.

Nothing against DD. They were good lights. I am mounting some LP6’s to the front bumper and that’s what ultimately made the decision for me. I do not like the larger DD’s and do not want to mix brands of Amber/yellow lights.

The DD’s are for sale with the wiring harness and mounting bracket. I also have some extra lenses for both the SS2 and SS3.
Message me directly if you are interested.

 

[RustysBronco]

Tore apart the cab for phase 1 of DIY hardtop prep kit, involving running washer fluid lines from the fluid reservoir, through the cab, and to the rear cargo area and hooking up the OEM harness.

Phase 2 will be swapping the steering colum wiper switch to support the hard top & programming in FDRS.

Phase 3 will be swapping my soft top for a hard top (50/50 on Anderson Composites vs ADV) & working out any lingering gremlins.

Special thanks to @flip pulling diagrams and @1Five1 Garage for sending me reference pictures for all the hose routing.

 

[Southern62]

Ditch lights, just so I can put plastic pumpkins on them at Halloween. And as soon as I think of other things to put on em, I will do that too!

 

[HarmCityHammer]

Checked out a few car shows with my boy!

Sponsored