Sponsored
Not yet. Still up in the air about it. Might wait a little longer and end up doing a true suspension lift.
Came out great. Love the look and the ride. Ever so slight rub occasionally when I turn hard right into a parking space, but I need to take it in for alignment.
Sponsored
- First Name
- Scott
- Joined
- Jan 24, 2021
- Threads
- 2
- Messages
- 30
- Reaction score
- 19
- Location
- South Mississippi
- Vehicle(s)
- 74 Bronco, 23 Bronco, 22 Toyota Camry TRD
- Your Bronco Model
- Heritage
Did the exact same to my BD and did not work with the stock steelies with 35x12.5x17. Tires hit the sway bar on full lock. Had to upgrade rims.
2 inch level kit 4wp
17x8 American Racing Baja's 0 offset
Dick Cepek EXP 35x12.5x17
Will be putting on Sasquatch fender flares
2 inch level kit 4wp
17x8 American Racing Baja's 0 offset
Dick Cepek EXP 35x12.5x17
Will be putting on Sasquatch fender flares
OP
OP
- Thread starter
- #37
Was the offset the problem? I am wondering if spacers would fix this?Did the exact same to my BD and did not work with the stock steelies with 35x12.5x17. Tires hit the sway bar on full lock. Had to upgrade rims.
2 inch level kit 4wp
17x8 American Racing Baja's 0 offset
Dick Cepek EXP 35x12.5x17
Will be putting on Sasquatch fender flares
- First Name
- Scott
- Joined
- Jan 24, 2021
- Threads
- 2
- Messages
- 30
- Reaction score
- 19
- Location
- South Mississippi
- Vehicle(s)
- 74 Bronco, 23 Bronco, 22 Toyota Camry TRD
- Your Bronco Model
- Heritage
I believe it was. I am not a fan of spacers and not sure if it would solve the problem.
any issues with spare tire? I have a non sasquatch Black Diamond and added OEM 35 sasquatch tires and wheels. Did the spare fit?I went with 35x10.5 Kenda's on my BL stock wheels. No issues.
Fits fine, third brake light is a little tight but usable. May change it out in the future.
Sponsored
ThxsFits fine, third brake light is a little tight but usable. May change it out in the future.
I put the 3rd brake light extension on when I went with the Kenda's. The issue I found was the soft top rubs on the brake light bracket when all the way down. Seeing that the tire fits with the brake light in its normal spot, I am going to remove the extension before top down season.
OP
OP
- Thread starter
- #43
It fits...
this is 315/70/17 on stock rims with no lift.
There was a very small amount of rub at full turn.
I have since added a level and new rims.
this is 315/70/17 on stock rims with no lift.
There was a very small amount of rub at full turn.
I have since added a level and new rims.
I have a base OBX/2.7/LUX arriving next week and I was able to find a pair of Sasquatch take offs locally for $1000. I'll sell the stock OBX wheels and tires so getting the wider 17" Sasquatch OEM wheels isn't very costly. My dealer has done lots of 315-70R17's on non SAS Broncos with no lift or just a 1" leveling kit which is what I'm doing. Here's a base one with 35's and no lift that I just saw at the dealer an hour ago. He said they were +20 offset but I'm not sure if he really new. I like the stuffed look but it would look great with the 1" leveling kit as well.
- First Name
- Brian
- Joined
- Dec 5, 2020
- Threads
- 108
- Messages
- 757
- Reaction score
- 1,923
- Location
- Sherwood, OR
- Vehicle(s)
- 2021 Bronco
- Your Bronco Model
- Badlands
Any rubbing with this set up??Did the exact same to my BD and did not work with the stock steelies with 35x12.5x17. Tires hit the sway bar on full lock. Had to upgrade rims.
2 inch level kit 4wp
17x8 American Racing Baja's 0 offset
Dick Cepek EXP 35x12.5x17
Will be putting on Sasquatch fender flares
Sponsored
