Amazing craftsmanship. Can you help me out with where the amplifier is mounted and how it receives its signal level inputs.
Sponsored
I mounted the amp under the drivers seat. I grabbed the inputs by using a T-harness at the head unit brainAmazing craftsmanship. Can you help me out with where the amplifier is mounted and how it receives its signal level inputs.
They are ok. They might be swapped out for the Flax seriesHow do you like these focal 3 ways?
I’ve been debating those or the Morel carbon nano 3 ways. Does your amp have a built in DSP?
I got this idea from the Focal America Bronco. I was up for the challenge so I went for it. I also swapped out the 5channel for a SR 4.500, SR 1.500 amps and added another JL sub. There is no DSP yet. I saw that Metra is releasing a dash kit for aftermarket head units so that will prob be nextNice, as always! Kick panel location not doing what you want?
I got this idea from the Focal America Bronco. I was up for the challenge so I went for it. I also swapped out the 5channel for a SR 4.500, SR 1.500 amps and added another JL sub. There is no DSP yet. I saw that Metra is releasing a dash kit for aftermarket head units so that will prob be next
That is the build I'm referring to that Sage at Sounds Good Stereo did. JT from Anaheim did the door speaker build. Sage explains it here...Got a link to this "Focal America Bronco"? Google search lands me on this YT from soundsgoodstereo, but it might not be what you're referencing.
That series of videos was a big confidence booster for me before I tore my interior apart earlier this year.
In that build they toyed with the idea of adding some mid-bass to the doors, but I think they scrapped it. If there's a build that follows through with that concept I'd love to see it.
If there was a 5% improvement available in my system it would be a slightly lower xover to the sub from the front stage without sacrificing impact. The TM65s are phenomenal. But It would be really nice to add some TM8s into the mix.
But that would require more amplification and more DSP channels so please stop giving me ideas.
I'm familiar with this company. This would the way cheaper way to go if your were purchasing and not building. I did message them. There is no door block off plate included. That's the extra step I took, was to seal off the doorcant speak to the quality of these, but these guys have a lot of door pod options for the bronco
https://customspeakerpods.com/product-category/vehicle-select/ford/bronco/
M noob at this. Anyways, does the voltage matter? From spec it seems like the audison amp requires 15v. ItFocal Performance 165A3 3-way components (Tweeter+3" passive off ch 1&2, midbass active ch 3&4)
Focal ACX100 (head unit)
Audison SR 5.600 75WX4@4ohms+1X550W@2ohms
JL Audio 10TW3D-4
Knukonceptz Oxygen Free Copper power/ground 4g, OFC 14g/16g speaker wire,
Knukonceptz fuse holder and distribution blocks
IMG_1903 by Jon Polo, on Flickr
IMG_1904 by Jon Polo, on Flickr
IMG_1905 by Jon Polo, on Flickr
IMG_1897 by Jon Polo, on Flickr
IMG_1898 by Jon Polo, on Flickr
M noob at this. Anyways, does the voltage matter? From spec it seems like the audison amp requires 15v and my understanding is that the battery provides 12vFor now I made a down firing sub enclosure. Future plans are I will make my own style JL Stealthbox
IMG_1569 by Jon Polo, on Flickr
IMG_1571 by Jon Polo, on Flickr
IMG_1573 by Jon Polo, on Flickr
IMG_1585 by Jon Polo, on Flickr
IMG_1586 by Jon Polo, on Flickr
IMG_1587 by Jon Polo, on Flickr
IMG_1610 by Jon Polo, on Flickr
IMG_1617(1) by Jon Polo, on Flickr
IMG_1909 by Jon Polo, on Flickr
IMG_1908 by Jon Polo, on Flickr