HERITAGE EDITION Bronco Club

[Toasterbath]

told you I would post some pics.... so...
this is the front mount of the rack... had to do this on each side. The two bolt holes I had to shave off about 1/4 to 3/8 inch down to make sure I had threads on the roof side. Those bolts that go through there extend down through the mount for the lights.

I also placed weather striping around the rack mount otherwise it would have created cavitation and a lot of wind noise....It works well.

Also had to trim a little on the cover and added weather stripping to it as well.... No wind noise from these.

The lights do create a little wind noise but not all that bad and nothing like some of the light "bars" I have heard.

From this point the lights mount right up just like normal.

Super appreciate the pics and explanation. Not bad at all! Looks great!

Sponsored

 

[okrush]

It took a lot of time but thought I best read 521 pages before I posted. I was extremely fortunate to be able to purchase the exact spec I wanted on an order not taken. Saw it on Autotrader and purchased it right away. Picked it up last Thursday after trying to time winter snow and cold through mountain pass in my trade-in of a 2023 Toyota GR86. But made it to Vancouver Island.
Icy and -34 Celsius through the mountains on way home but performed great.
I feel for everyone that has waited so long for their Bronco, I've waited a year a couple of times for vehicles and 16 months for GR86 but three years is something else.
After reading I realize this was one of earliest builds, blend date was Mar 8 2023. Like many others didn't get delivered until much later. I asked dealer when they received it and they did PDI Dec 14 so around that date.
Dealership experience was amazing (Van-Isle Ford) and I'm so impressed with this Bronco.

 

[BigFootie]

It took a lot of time but thought I best read 521 pages before I posted. I was extremely fortunate to be able to purchase the exact spec I wanted on an order not taken. Saw it on Autotrader and purchased it right away. Picked it up last Thursday after trying to time winter snow and cold through mountain pass in my trade-in of a 2023 Toyota GR86. But made it to Vancouver Island.
Icy and -34 Celsius through the mountains on way home but performed great.
I feel for everyone that has waited so long for their Bronco, I've waited a year a couple of times for vehicles and 16 months for GR86 but three years is something else.
After reading I realize this was one of earliest builds, blend date was Mar 8 2023. Like many others didn't get delivered until much later. I asked dealer when they received it and they did PDI Dec 14 so around that date.
Dealership experience was amazing (Van-Isle Ford) and I'm so impressed with this Bronco.

I might be biased but that looks great!

 

[Ender]

Got my leather seats installed today. I think they turned out really nice.
I was originally going to go with something like the nintendo concept seats, but since we have so much blue in our interior, I decided to go with blue accents instead of a darker gray.

I like it and was considering doing the same thing. Would you be willing to post more details including cost?

 

[mjcutri]

I like it and was considering doing the same thing. Would you be willing to post more details including cost?

They were $2,395+tax installed. Katzkin didn't have the HE as a model option, so I used OB since that has the Navy Pier in the interior as well. I wanted a lighter color in the middle since it gets pretty hot where I live in the summers, so that's why I went with the Lunar Grey. It's actually pretty close to the steel grey leather that I had in my 2014 F-150.
I thought about adding the cooling, but you have to add both heating and cooling with the new switches to control those. I didn't think the added cost was worth it since we already have the heated seats and then the buttons on the dash wouldn't work.

If you decide to buy them, mention my name and vehicle details (Ford Bronco) at the time of purchase and you can get $50 off. Just PM me and I'll reply with my name.

 

[ColoradoBroncoFan]

They were $2,395+tax installed. Katzkin didn't have the HE as a model option, so I used OB since that has the Navy Pier in the interior as well. I wanted a lighter color in the middle since it gets pretty hot where I live in the summers, so that's why I went with the Lunar Grey. It's actually pretty close to the steel grey leather that I had in my 2014 F-150.
I thought about adding the cooling, but you have to add both heating and cooling with the new switches to control those. I didn't think the added cost was worth it since we already have the heated seats and then the buttons on the dash wouldn't work.

If you decide to buy them, mention my name and vehicle details (Ford Bronco) at the time of purchase and you can get $50 off. Just PM me and I'll reply with my name.

In your picture, it looks like the top of the backrests are more off-white than lunar gray and the diamond-stitched centers look more silver. It might just be the angle, sun, etc. Are both lunar gray? Thanks!

 

[Red Squatch]

We are at 521 pages now, based on train progress, (it is now outside of Chicago), I am estimating a delivery date to the dealer of January 30th for my Heritage, so that's 10 days out. I will add a couple of days for PDI and pick up to that and make it a total of 12.

at 1.5 to 2 pages a day on the average, I am guessing I will take delivery and post my Heritage pictures here on the 2nd of February, so about 12 days out.

12 x 1.5 = about 18 pages later

so my guess is I will post my pictures at 521 + 18 = page 539

I will take the under at 539.

You made me check back. I picked mine up at page 321. That was a happy day.

 

[mjcutri]

Yes, it's all lunar grey. The sun was low in the sky and shining through the windshield in that pic.

 

[mjcutri]

Taking the under for post/page count in this thread is dangerous. As has been stated previously, we're a chatty group in here.

 

[JawnyBronco]

 

[Jhopkinson]

It took a lot of time but thought I best read 521 pages before I posted. I was extremely fortunate to be able to purchase the exact spec I wanted on an order not taken. Saw it on Autotrader and purchased it right away. Picked it up last Thursday after trying to time winter snow and cold through mountain pass in my trade-in of a 2023 Toyota GR86. But made it to Vancouver Island.
Icy and -34 Celsius through the mountains on way home but performed great.
I feel for everyone that has waited so long for their Bronco, I've waited a year a couple of times for vehicles and 16 months for GR86 but three years is something else.
After reading I realize this was one of earliest builds, blend date was Mar 8 2023. Like many others didn't get delivered until much later. I asked dealer when they received it and they did PDI Dec 14 so around that date.
Dealership experience was amazing (Van-Isle Ford) and I'm so impressed with this Bronco.

Grats on the nice looking rig!

 

[BigBendBW]

Feel like we are blessed to have the opportunity to have these HEs. Excited for all those of you waiting to get em but especially those MY23 2 doors that reordered for MY24.

 

[OverlandingPastor]

Feel like we are blessed to have the opportunity to have these HEs. Excited for all those of you waiting to get em but especially those MY23 2 doors that reorders for MY24.

Looks so good! The next 3 weeks are going to be hard as I wait on mine!

 

[BigBendBW]

Looks so good! The next 3 weeks are going to be hard as I wait on mine!

Definitely worth the wait. My first one was build week this week (1/18/21) 2 years ago and went to Ice Mountain and I didn’t see it until May. That was brutal.

 

[C6ZZGT]

Not having a 3D pronter, if you are willing to print some extras, I'd be happy to pay you for a set.

Been gone for awhile,lookd like you got hooked up.

Sponsored