🛠 1/3/22 Build Week Group

[stevensantee]

Okay I've been thinking about doing my front letters in orange to match the Badlands badges, so did you buy this somewhere or home made? Love it, I almost went orange!

These are from stickerfab. I believe the color was badlands orange actually.

Sponsored

 

[BadKat]

These are from stickerfab. I believe the color was badlands orange actually.

Thank you!!

 

[stevensantee]

Thank you!!

I found my actual order info

 

[BadKat]

I found my actual order info

just added them to my cart now, thanks so much for the help!

 

[knownhuman]

@Cat & @Alvin Olson on your M and R fog lights, where did you attach the grounds?

 

[Alvin Olson]

@Cat & @Alvin Olson on your M and F fog lights, where did you attach the grounds?

i used a nearby bolt that was already in the bumper.

 

[knownhuman]

i used a nearby bolt that was already in the bumper.

Word. I'll try that location. I got everything wired up and am not getting lights

 

[Alvin Olson]

Word. I'll try that location. I got everything wired up and am not getting lights

i ran a wire to the battery to test the lights. That way i knew the worked. Ground is super important too.

 

[knownhuman]

i ran a wire to the battery to test the lights. That way i knew the worked. Ground is super important too.

My hope is that the place I grounded is too powder coated

 

[Aman]

Hi @Aman....have you installed this yet?

Are you connecting it to a 10 amp Aux switch?

I might tackle my install today.

Weather was hit or miss this weekend, so tackled some non-Bronco related projects.

Did you get a chance to install yours? Power to the battery, good ground, and purple wire to one of the 10 amp switches should do it.

 

[Gatlinz]

Has anyone tried installing the IAG bars for the soft top? I just tried installing it and neither side bracket fits. The holes are just barely off. But enough that I almost stripped the holes where the screws go into the soft top support thankfully I got the oem bolt back in. But I am returning this product.

I just got done installing mine. you don't need a longer bolt. the two holes are misaligned just a bit. with your free hand "jiggle" the bar from the top as you are screwing it in and the bolt will take hold. this happened to me. once i got on my knees and saw what the problem was it was easy to fix. In the install video you can see where the installer guy holds the bars straight. it's a bit subtle ,but that will fix your problem.

 

[Gatlinz]

Still no Bronco *sigh* but got a nice bag of swag from the dealership!

Wow, thats like 10 times what I got. I got a insulated bottle and a t-shirt. you are either a lucky duck or the dealer is prepping you for some bad news....

 

[Gatlinz]

Last call for First Batch MY22 shirts. If any Ice Mountain folks are in here I have a order form for those as well.

Hey just wanted to check in to see if you guys were doing the door sills or did that idea possibly get scrapped and i missed it. @daddycreswell

 

[Tarheel_Wes]

So, I switched out my interior LED lights for some Govee rock lights.....since they have the ability to change color (I wanted to be able to do red or white or anything).....got them all wired up...they are nice....made of solid steel casing....just have to figure out mounting them securely....don't think double-sided tape is gonna hold them up like the lights I had on there.

 

[Broski5738]

Ordered “tube steps” out of the parts catalogue to use my dealer credit. They finally came in. I guess Ford has a different definition of the word step.
I like the looks of them, but they offer 0 utility and cannot be stepped on, even by a 45lb girl.

Sponsored