Anyone install IAG 4 piece interior lights?

[Lonecamper]

There’s a thread on it…I just searched for a bit and can’t find it. I know I’m following it - but…I’ll post if I dig it up.

https://www.bronco6g.com/forum/threads/transistor-irfp-9140-mosfet-for-interior-lights.66956/
I found it here, but it's kind of confusing the way they wired the transistor to the light.

Sponsored

 

[GroovyGeek]

I bought these IAG interior lights but have not installed them yet. It would be perfect if I could wire them to be controlled by the map light switch instead of opening the door or taking up an aux switch for them. My question is if I wire per the instructions will they be disabled when I disable the interior lights with the map light switch? The reason why I need them to be disabled is because when I'm camping I disable the lights so I can keep the doors open mainly the tailgate, and have access to my camping gear in the bronco without putting unnecessary drain on the battery.

There is an option brand new by another one of the established vendors here. Seems much easier to install and does exactly what you are asking for. Look around, don't want to hijack this thread

 

[redone17]

Yeah. It’s pretty annoying IAG didn’t take the time to offer that harness as well. They acted like it was a cure to cancer to get approved by the board before release.

 

[rotorwrench]

So, All of you that tapped into Aux 6, Where and how did you pigtail?

 

[markpilip]

Yes and well worth it. The only real pain point, literally, is splicing into the factory harness. Other than that it’s pretty straightforward. Took me about an hour

Agreed. I originally spliced into the power locks, so the lights would flash as the car got up to speed.

I'd highly recommend wiring it to the up fitter switches (Aux 6) if you have them. Huge advantage to have both working interior illumination and a way to quickly flip them on without opening the doors.

 

[WILDcardOD]

I have the Mabett dome light and the IAG lights. Huge difference. But IAG did take a lot more time than I thought It would take Dome lights take 5 minutes if you Want to start there.

How’s the temperature/color of the lights? Colder/blue, true white like daylight, or gross warm light any difference between dome and the IAG lights

 

[GroovyGeek]

I have the Mabett dome light and the IAG lights. Huge difference. But IAG did take a lot more time than I thought It would take Dome lights take 5 minutes if you Want to start there.

What's the huge difference?

 

[PrepVet]

Probably a silly question, can I install both the Mabett center light and the 4 post remotes lights together?

 

[GroovyGeek]

Probably a silly question, can I install both the Mabett center light and the 4 post remotes lights together?

Yes

 

[DallanW]

I am only slightly mechanical. Any suggestions on where to get these installed? I tried an IAG dealer but he only works on Subaru's. Not comfortable taking apart the fuse box and trying to splice things into a new truck.

 

[Headsong]

I've decided to pass on installing these. New in the box, make an offer.....

 

[Felix808]

So, All of you that tapped into Aux 6, Where and how did you pigtail?

Right at the firewall in the engine bay where all the powered aux wires come together. Reference pg. 455-456 of the owners manual.

Sponsored