ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

[Vtfakie]

Would there be a solution to get a ball mount attached that rises up vertically and then has the ball joint sticking out toward the cabin instead of up? I would like to use it to mount the Belkin MagSafe charger. This comes with vent clips but you can remove them and attach it to a ball mount.

TrakForm has some different arm options. Not sure the size of the ball on that Belkin, but here are different arms for 20mm.

https://www.tackform.com/collections/enduro-components-20mm/arm

Sponsored

 

[Canonman11]

count me in!I need a better solution then the cobbled together pos i made out of old gopro and dslr mounts,don't think it will survive offroading lol

Definitely need a solid iPhone mount that can turn both directions. Just bought the rail so hope to see some nice mounts. GoPro is second.

 

[Canonman11]

This pic was very interesting and would like to know what switch module that is in this pic? That is a great place for us folks without a aux switches And I will do this. Does anyone have some info on this?

 

[Kluch]

TrakForm has some different arm options. Not sure the size of the ball on that Belkin, but here are different arms for 20mm.

https://www.tackform.com/collections/enduro-components-20mm/arm

Pretty sure it is 20mm. I see how maybe one can cobble together something from the parts they offer. But I don't see anything that would allow attachment to the rail.

 

[CTS-V]

Send it!

 

[DubC]

Pretty sure it is 20mm. I see how maybe one can cobble together something from the parts they offer. But I don't see anything that would allow attachment to the rail.

The Belkin accepts a 17mm ball. I’m using the same one. You’ll need a 20mm to 17mm ball adapter.

 

[Kluch]

The Belkin accepts a 17mm ball. I’m using the same one. You’ll need a 20mm to 17mm ball adapter.

Excellent! Thank you DubC. Any chance you would have links to the parts you used? What I'm having the most trouble finding is how you are connecting to the rail.

 

[DubC]

Excellent! Thank you DubC. Any chance you would have links to the parts you used? What I'm having the most trouble finding is how you are connecting to the rail.

In my build thread here…

https://www.bronco6g.com/forum/thre...k-badlands-sasquatch-build.25329/post-1057938

 

[Vtfakie]

But I don't see anything that would allow attachment to the rail.

There are a few options in there.

https://www.tackform.com/collections/enduro-components-20mm/base?page=2

I have the Trakform mount for the Bronco which is currently screwed into the 1/4-20 threads on the dash. Once my rail arrives, I'll either use a longer screw with a locknut on the underside, or try one of their other options.

 

[EIGHTLUG]

This pic was very interesting and would like to know what switch module that is in this pic? That is a great place for us folks without a aux switches And I will do this. Does anyone have some info on this?

This is Kyle’s (DelFab) Bronco. Reach out to him. @delfab on Instagram.

 

[campbebc]

@EIGHTLUG should all on the pre-order list already have tracking info or are you still cranking through the close to 300 orders? #214 on the list, totally fine with the shipping delays in your area, just want to ensure I'm not overlooked as I'm itching to put it to use for winter GoPro footy!

 

[EIGHTLUG]

@EIGHTLUG should all on the pre-order list already have tracking info or are you still cranking through the close to 300 orders? #214 on the list, totally fine with the shipping delays in your area, just want to ensure I'm not overlooked as I'm itching to put it to use for winter GoPro footy!

We’re continuing to churn through BAM orders. Rest assured, yours will be shipping out, ASAP!

 

[Smilinacura]

Where can I get those ram mounts and arms?

 

[Vinny6G]

Where can I get those ram mounts and arms?

Looks like 67 Designs

 

[ICUGAZN]

Looks like 67 Designs

Yep, it is 67 Designs.

Sponsored