Battery Positive Extra Terminals -- size of all the bolts needed for the threaded studs and what the thread is?

[J-BirdOnAWire]

Dose anyone happen to know the size of all the bolts needed for the threaded studs and what the thread is?

Sponsored

 

[Silver-Bolt]

I think you means nuts?

 

[Bmadda]

M6x1.0 IIRC. Very common size

 

[SuperDave150]

I see two different sizes. I don’t know what size either one is.

 

[Karl_in_Chicago]

I think you means nuts?

Which nuts?

Dose anyone happen to know the size of all the bolts needed for the threaded studs and what the thread is?

Echoing Silver-Bolt's response think you must mean nuts. In another thread on this forum this was a topic and a member reported success with Deez Nuts.

 

[RagnarKon]

• Inside one (closest to the engine) = M5
• Outside one = M6

Allow me to introduce you to the installation guide. Page 20 on the 2023 document for this particular topic.

 

[BlueBronco]

Which nuts?

Echoing Silver-Bolt's response think you must mean nuts. In another thread on this forum this was a topic and a member reported success with Deez Nuts.

Well played. Admittedly, I was hesitant and nervous clicking your hyper link on my work computer.

 

[awall987]

From another thread. I took a screen shot to use when I went to Home Depot.

 

[Bill K]

• Inside one (closest to the engine) = M5
• Outside one = M6

Allow me to introduce you to the installation guide. Page 20 on the 2023 document for this particular topic.

Many thanks. Might of kept me from hunting thru all of my leftover hardware in the garage to find a match...

 

[mdk100]

Don’t over-torque them!

I over tightened the M6 installing my compressor and broke loose the bolt mount. Didn’t seem like a lot of pressure. The bolt free spins now, making that post useless. I used the other post, but looks like I’ll need to replace the entire accessory rail for the battery someday.

 

[JackFlack]

This is incredibly helpful. One question that I cannot seem to find the answer to after crawling through the user manual, equipment installation guide, and everything else I have access to. What is the 3A fuse for by the extra battery terminals?

 

[EcoBco]

This is incredibly helpful. One question that I cannot seem to find the answer to after crawling through the user manual, equipment installation guide, and everything else I have access to. What is the 3A fuse for by the extra battery terminals?

The 3A fuse is for the battery monitoring sensor

 

[MadMan4BamaNATL]

Which nuts?

Echoing Silver-Bolt's response think you must mean nuts. In another thread on this forum this was a topic and a member reported success with Deez Nuts.

See Karl, that’s why we can’t have nice things!

Sponsored