Black Diamond Bronco Thread

[kodiakisland]

Facebook marketplace. If you change them out right away, FTO’s with hardly any miles, a set of 5 would probably get you 4 out of your 5 replacement tires depending on cost of your new ones.

set of 5 32” tires near new I don’t think you’d have a problem getting $700-800 out of. Don’t trade to dealer. They’ll give you shit for them then turn around and do the same thing.

Certainly depends on your particular market, but around here most factory new takeoffs go for about 50% of new prices, but it also depends on actual brand of wheel and tire. Some are more desirable than others. Take off Generals won't be a hot commodity. Start high though so you have some haggle room.

Sponsored

 

[tshaw2009]

I'm confused:
"2-Door Cyber Orange Black Diamond = $34,789": is it starts at $36,050?
Also, how did you do the math about the diff between base and BD? In my math it will around $7K difference. I hope I'm wrong I like your numbers

I will also give you a link to the payment calculator spreadsheet so you can add all your options and discounts. You will have to manually put in the Invoice price into the spreadsheet as it defaults to MSRP. Also, if you pay $25 for a year-long Mustang Club of America membership, you qualify for X-Plan pricing. I did and received my card which allows me to get my X-plan PIN within 1 week of signing up. https://www.bronco6g.com/forum/threads/monthly-payment-tool.4362/

 

[www86aws]

I will also give you a link to the payment calculator spreadsheet so you can add all your options and discounts. You will have to manually put in the Invoice price into the spreadsheet as it defaults to MSRP. Also, if you pay $25 for a year-long Mustang Club of America membership, you qualify for X-Plan pricing. I did and received my card which allows me to get my X-plan PIN within 1 week of signing up. https://www.bronco6g.com/forum/threads/monthly-payment-tool.4362/

Thank you for the help!

 

[tshaw2009]

Thank you for the help!

No problem!

 

[WNC_Bronco]

Yeah, add sasquatch/any black wheels and it's sick

Guy at work just did a 2" lift and added 35's to his new jeep.

Was not even considering the sasquatch option but damn his ride looks sweet with the lift and the 35's.

I am now considering adding the sasquatch to the BD with 2.7,Auto,Mid Package, Modular Front Bumper,Brush guard.Still within budget

 

[WNC_Bronco]

I, like many before me have been stuck with the same dilemma: Base 4-door completely tricked out as much as options allow or Black Diamond 2-door for around same price and with more standard goodies. I believe today.....I have finalized my choice....maybe! I will be going with the Black Diamond 2-door for a couple of reasons:

1. Mid Package is offered on the Black Diamond for only $1500. (Not offered on the Base)
2. I get my washable vinyl seats. (This is great when you have young children who spill things constantly)
3. I get rubberized flooring standard. (Is great for the same reason as No. 2)
4. Rock rails and HD front bumper is standard. (This just makes sense in an off-roader and should be standard on all trims)
5. I get my school bus orange color! (Nobody can deny that's exactly what it looks like, yet I still love it on the Bronco)

This is my current supposed configuration based on invoice price with Granger discount and X-Plan:

2-Door Cyber Orange Black Diamond = $34,789
Paint= $595 up-charge
2.7L V6 with 10 Speed Automatic = $3,500
Sasquatch Package = $4,500
Mid Package = $1,500
Dealer Fee = $100
Destination and Delivery Fee = $1,495
Total before Discounts = $46,479

Discounts:
Trade-In = $11,500 (Based on KBB)
Down-Payment = $7,000
X-Plan = $300
Granger Deal = $1000
Total after Discounts = $26,679 (Very Doable)

My Base 4-Door was coming out to $23,497. For $3k extra I'm getting a whole lot more truck for the money.

Pretty much my build on a 2 door as well except the color which i dont know what to go with at this point.Kinda digging white this week

 

[Used2jeep]

just like the book...'50 shades of grey'

Should we turn off the lights for some privacy?

 

[Used2jeep]

I adjusted the sheet to invoice pricing from different posts and I estimated what the invoice pricing would be on options from a Granger post from awhile ago. Just a rough estimate.

How did you finagle that spreadsheet to take out the $1,300 from invoice?

 

[Used2jeep]

I do. Been researching that. The stock steelies should be fine and I'm good with them.

It's only another 20mm or so difference so I would suspect that they fit. Considering 35s are 315mm.

 

[Carolina Jim]

Should we turn off the lights for some privacy?

lights off....lights on....with these coal-mine interiors, what's the difference?

 

[dingle87]

How did you finagle that spreadsheet to take out the $1,300 from invoice?

I found a spreadsheet that calculated using MSRP. Then I used pricing found in multiple locations based on assumptions. I can’t remember exactly who posted, heck it might have been Albert from Granger, but again I’m not sure. It’s been a long week. Lol

I think the invoice pricing came from a different spreadsheet or post with the invoice pricing for each model. I’ll try to find it again.

It’s something I combined just to give myself a rough estimate, so I could make some decisions on options. Yet... I really haven’t figured anything out.

B&P will be the only thing that clears this up.

 

[TXKK626]

Looks bad because I wrote it but gives you an idea non sasq 4D

Looks like the same configs I’m considering. Thanks for the summary!

 

[bk1287]

Looks like the same configs I’m considering. Thanks for the summary!

Hard top is only 700 on the BD?

 

[Used2jeep]

I found a spreadsheet that calculated using MSRP. Then I used pricing found in multiple locations based on assumptions. I can’t remember exactly who posted, heck it might have been Albert from Granger, but again I’m not sure. It’s been a long week. Lol

I think the invoice pricing came from a different spreadsheet or post with the invoice pricing for each model. I’ll try to find it again.

It’s something I combined just to give myself a rough estimate, so I could make some decisions on options. Yet... I really haven’t figured anything out.

B&P will be the only thing that clears this up.

@North7 did the first sheet (2/4 door, MSRP/Laura Ford/x plan/Granger x plan). The second sheet I have been using, can't recall who made that but they also put out a Google docs version (where you put the"x" in the column to carry the process to the right set of columns). That is the one where I'm trying to figure out how to do the Granger invoice adjustment.

 

[Used2jeep]

Hard top is only 700 on the BD?

Yup, well based on the Survey price anyhow.

Sponsored