Ceramic Window Tint Question

[GreyZ]

Does noone else have inspection stickers/brake tag on their front window? How do you remove the adhesive inspection sticker when it is time for a new one without cutting/peeling up the tint?

Sponsored

 

[Ft. Worth Rob]

Does noone else have inspection stickers/brake tag on their front window? How do you remove the adhesive inspection sticker when it is time for a new one without cutting/peeling up the tint?

Get sheets of cling film from the hobby shop or Amazon to affix your sticker to then press that on the glass.
Grafix Clear, 9 x 12” Sheets, Static Film, Create Your Own Window Clings and Temporary Decorations, Just Stick to Any Glass, Acrylic, or Glossy Surface(KCF6C), 6 Count (Pack of 1) https://a.co/d/hGX0oUi

 

[Az_Squatch_Bronco]

I had the front windows tinted today with Xpel Prime XR. What a difference it made in regards to heat here in sunny California.

I understand it takes up to two weeks to fully cure allowing any bubbles and or air to smooth out.

I’m considering having the ceramic tint applied to the windshield, but I can visibly see the tint on the window, it looks dimpled, if that makes sense, and don’t want to be looking at dimples on my windshield, that would drive me crazy.

Have you had this product installed? Once it fully cures will I still see it? If so I need to cancel having it installed on my windshield

I have 40% Ceramic on my windshield. No bubbles etc...make sure the installer is good. You may have some small bubbles initially but by day 3 in the heat those should be gone.

Sponsored