Help with wheel offset choice?

[Broncointhesmokies]

Is anyone running 17 x 8 wheels with 0 mm offset that wouldn’t mind sharing pictures of the amount of poke from base fender flares?

Sponsored

 

[BOLD Renegade93]

So I know you said you wanted pics of non-SAS flares, but these are my 17x8 with 0 offset wheels paired with SAS flares. Just cut the flares in half and hopefully that helps you envision it with regular flares

 

[BOLD Renegade93]

I lied! I found some older ones before swapping the non-SAS flares to SAS in my cloud storage. Different angle but it shows a good difference in tread coverage.

 

[BOLD Renegade93]

My tires are 295s so a little more tread width than others you typically see.

 

[HoosierDaddy]

OK, I'll play "Let's post exactly what you're NOT looking for"!!
LOL

Method 703
17 x 8.5 +35mm offset
35 x 11.5 - 17 Load Range C
Standard flares
base Base - NO LIFT!!! No rub

 

[TXAG96]

OK, I'll play "Let's post exactly what you're NOT looking for"!!
LOL

Method 703
17 x 8.5 +35mm offset
35 x 11.5 - 17 Load Range C
Standard flares
base Base - NO LIFT!!! No rub

nicely done

 

[BOLD Renegade93]

OK, I'll play "Let's post exactly what you're NOT looking for"!!
LOL

Method 703
17 x 8.5 +35mm offset
35 x 11.5 - 17 Load Range C
Standard flares
base Base - NO LIFT!!! No rub

Hey I corrected myself after doing some digging! Now they can see both options in case they desire to swap flares. Above and beyond!

 

[HoosierDaddy]

Hey I corrected myself after doing some digging! Now they can see both options in case they desire to swap flares. Above and beyond!

Like we need a strong reason to post up our mods..... LOL!!!!

Them ...."Hey, who has Fifeteen52's and 33's? Post em up!!!!"

US.... " Umm yeah, check out dees Methods and 35's!!!!"

 

[BOLD Renegade93]

Like we need a strong reason to post up our mods..... LOL!!!!

Them ...."Hey, who has Fifeteen52's and 33's? Post em up!!!!"

US.... " Umm yeah, check out dees Methods and 35's!!!!"

Nope. Humble brag all day!

 

[HoosierDaddy]

@BOLD Renegade93

OK, next victim located!
https://www.bronco6g.com/forum/threads/has-anyone-put-on-pro-comp-51-wheels.35312/

Let's roll!!!
LMAO!!

 

[Broncointhesmokies]

I lied! I found some older ones before swapping the non-SAS flares to SAS in my cloud storage. Different angle but it shows a good difference in tread coverage.

Thank you so much and I really appreciate it!!! I may end up having to put sas flares as you have. Awesome look!

 

[donivan]

Is anyone running 17 x 8 wheels with 0 mm offset that wouldn’t mind sharing pictures of the amount of poke from base fender flares?

Tire width will be the main driver for amount of poke assuming 0 mm wheel. You will not see as many 17x8 0 mm wheels as 17x8.5 0 mm wheels on this site. Poke will essentially be the same between those two wheels widths with 0 mm offset because the poke is driven by the tire width since the wheel is narrower than the tire.

 

[Broncointhesmokies]

Tire width will be the main driver for amount of poke assuming 0 mm wheel. You will not see as many 17x8 0 mm wheels as 17x8.5 0 mm wheels on this site. Poke will essentially be the same between those two wheels widths with 0 mm offset because the poke is driven by the tire width since the wheel is narrower than the tire.

Thanks man - I appreciate the reply!

 

[Broncointhesmokies]

OK, I'll play "Let's post exactly what you're NOT looking for"!!
LOL

Method 703
17 x 8.5 +35mm offset
35 x 11.5 - 17 Load Range C
Standard flares
base Base - NO LIFT!!! No rub

Hah - I do appreciate the reply. I’ve seen your bronco several times and love it. I’ve actually taken a screenshot of your bronco as comparison guide Because I love the way yours looks!

 

[MattBoogaard]

Newbe here so not sure if this is best place to post this. I have NON SAS Flares and looking to trade for SAS flares. Seems like there are many people wanting to both directions.

Sponsored