- First Name
- Kevin
- Joined
- Jul 13, 2020
- Threads
- 0
- Messages
- 138
- Reaction score
- 219
- Location
- New Jersey
- Vehicle(s)
- Bronco
- Your Bronco Model
- Badlands
Yeah, i added kilmat inside the enclosure along with poly fill, which I was expecting a big improvement from along with the woofers. But was not impressed.Good mid bass usually requires a correctly sized enclosure and a lot of power, the OEM kick panels are not sealed in any way so the kick panel speakers are essentially playing free air, which allows the rear wave of the speaker to cancel out the front. Also a sealed (or properly ported) enclosure acts as a spring to dampen and enhance output, without it bass is a mess, and itās why the kick panel speakers are not doing much with the way Ford designed them, even with aftermarket speakers. Look at the loose foam plug below the woofer and the other openings on that panel, if you seal those well you will get tighter, punchier mid bass. It still wonāt go super low, but it should sound better.
Sponsored