Most important skid plate besides front

[kevin.gt]

You can see some dirt on my cross member support bracket near my fuel tank. That was from one trail in NE Georgia that was a bit rutted. Kinda wish I would have held out for the LoD transmission skid instead of the Asfir skid just to cover those up and smooth it out. Hope I don’t get caught up on them.

Sponsored

 

[Badassbronco]

I just bought the OEM transfer case skid. I think I’ll add the gas tank skid in the near future as well

Thanks all for your help

 

[Go Devils]

fuel tank. it's plastic, exposed, and huge.

The OEM transfer case skid is about $50 shipped from Ruxer. Seems like a no brainer.

Some people on the forum are fabricating their own transmission skid from 1/4" aluminum, but the metal isn't that cheap, so I just bought mine from Asfir when I ordered the fuel tank skid.

You mentioned Ruxer has the T case skid plate for $50? Do you have the link by chance? I couldn’t find it. Thanks.

 

[kevin.gt]

You mentioned Ruxer has the T case skid plate for $50? Do you have the link by chance? I couldn’t find it. Thanks.

You’ll need to create an account, then message @flip and he’ll add you to the b6g discount. Then when you shop AND you are logged in, you’ll see cheaper prices. One thing to note: i need to be logged in when i add to cart as the price does not drop in cart after logging in. For instance, the transfer case skid is $36 plus ship. Note, you will need some hardware too.

Skid:
https://www.ruxerparts.com/oem-parts/ford-plate-mb3z7e063a

Bolt (4 needed):
https://www.ruxerparts.com/oem-parts/ford-bolt-w717376s439b

Clip nut (2 needed):
https://www.ruxerparts.com/oem-parts/ford-bracket-nut-w717461s439

 

[Cwill79]

I just bought the OEM transfer case skid. I think I’ll add the gas tank skid in the near future as well

Thanks all for your help

How did this install go? Pretty straight forward? I just ordered as well.
Thanks

 

[dejones64]

Gas tank, but catalytic comes to mind.

 

[M&M Beer]

My skid plates came plastic I ordered a MOD bumper took it back to the dealership and they did a little mis-build form and now they are ordering a new set this time steel. Make sure to check the bash plates this happened on several models with the MOD bumper.

 

[ChompSticks]

Rear shock skids. I nailed both sides pretty good that it almost punctured the shock itself.

 

[Snacktime]

For light wheeling-Gas Tank
For Moderate wheeling-whole bottom side
For Hardcore wheeling-3/16 Steel everywhere

Its not so much which one, its more of all of them.

 

[cburke996]

The transmission cross member braces are pretty vulnerable, have bent edges that seem to catch everything. Mine quickly got hit. So I covered them up with the JCR trans skid, which also necessitated the front/engine skid to go with it.

Sponsored