The window sticker on my 2022 Badlands Sasquatch shows Tow Hooks - Frt (2) / Rear (2).
Sponsored
As most bone-stock Jeep owners will tell you, this doesn't matter. You get to the trail head, you bust out the wrenches, and disconnect them yourself.they are known as "anti roll bars" so they prevent you from rolling over in a turn.
Bad news is , if there is no disconnect , the badlands just became less capable and the rear articulation will be less....
LOL.. This move does not surprise me at all... Ford communicate? It is probably all mentioned in some FAQ somewhere that they changed and didn't tell people...This is such BS. They should feel required to disclose any changes being made to people who ordered and are waiting. Not wait for us to find out like this. Another bad move in a long long list of bad moves by ford.
Interesting. The WS on my Wildtrak shows 1 Rear.The window sticker on my 2022 Badlands Sasquatch shows Tow Hooks - Frt (2) / Rear (2).
Why do this??? Automotive suppliers usually work on a contract to supply the manufacturer with progressively lower cost parts, year by year. If Ford committed to ordering enough fucking glovebox lights for 3 or 4 or more MY's, the cost would be negligible compared to re-engineering parts or omitting them.Has anyone seen this? List of items removed from 2022 Ford Raptor (courtesy of f150gen14 forum). I wonder if some of these items might be missing from the Bronco like the LED license plate lights.
List of items removed from ‘22 raptor HERE’S WHAT WAS REMOVED FOR 2022:
1. Cup Holder Ambient Lights
2. Secondary Ambient Door Light for Door Cupholder directed Illumination removed
3. Media Bin Light
4. Glove Box Light
5. LCD Readout Temperature Adjustment Dials
6. Leftmost and Rightmost Vents no longer have an adjustment dial to turn off air flow instead you must manually close vent
7. Media Bin Snap In Phone Holder is no longer included
8. License plate lights are now Incandescent instead of LED
CC: @StevieD23
Anyone have the color-matched keypad photo?
The side graphics have always been an option, add on or not, but the hood graphic should be standard on all WTWildtrack also appears to have lost its body graphics. Saw a two door in the new green at the dealer today, no graphics on the body just like the blue one at the top of this thread.
In the case of a solid rear axle the bar increases the wheel rate in single wheel bump while having little change to both wheels rate acting in bump in the same direction. It increases roll wheel rates in cornering while keeping ride quality.Came here to say the same.
Here's another over simplified explanation...
They connect one suspension's knuckle/hub to the other. When one side compresses, the other side compresses equal to the stiffness of the roll bar. The stiffer the bar, the more equal the compression of each side.
Ford can be weird with ambient lighting. The 2017 F150 had the full RGB ambient lighting, but 2018 it became ice Blue only -- hardware change to single color LEDs so you couldn't just enable it in Forscan. Other models kept RGB, only the F150 was affected.List of items removed from ‘22 raptor HERE’S WHAT WAS REMOVED FOR 2022:
1. Cup Holder Ambient Lights
2. Secondary Ambient Door Light for Door Cupholder directed Illumination removed
3. Media Bin Light
4. Glove Box Light
5. LCD Readout Temperature Adjustment Dials
[Etc]
CC: @StevieD23
This is disappointing. So if you were lucky enough to to get a 21 build date you get the car your ordered but for everyone else you‘re forced to take downgraded options?Has anyone seen this? List of items removed from 2022 Ford Raptor (courtesy of f150gen14 forum). I wonder if some of these items might be missing from the Bronco like the LED license plate lights.
List of items removed from ‘22 raptor HERE’S WHAT WAS REMOVED FOR 2022:
1. Cup Holder Ambient Lights
2. Secondary Ambient Door Light for Door Cupholder directed Illumination removed
3. Media Bin Light
4. Glove Box Light
5. LCD Readout Temperature Adjustment Dials
6. Leftmost and Rightmost Vents no longer have an adjustment dial to turn off air flow instead you must manually close vent
7. Media Bin Snap In Phone Holder is no longer included
8. License plate lights are now Incandescent instead of LED
CC: @StevieD23