- First Name
- Johnny
- Joined
- Jul 15, 2020
- Threads
- 0
- Messages
- 30
- Reaction score
- 70
- Location
- California
- Vehicle(s)
- Bronco
- Your Bronco Model
- First Edition
But it does look awesome
Sponsored
DudeHad the Maxlider Stage 1 4" lift installed.
So you have a very retro looking rig! I would leave the 35β tires on.Here is the listβ¦ basically some custom fit BDS control arms and a special Zone spacer kit. Itβs compatible with their stage 2 coil over kit that is not out just yet.
2 - BDS Suspension upper control arms (left & right)
2 - front upper strut spacers
2 - rear upper strut spacers
2 - 3/8" rear upper strut spacer
2 - front preload spacers
2 - front bump stop extensions
Presumably wheel travel, but only if they do it right. The King rear coilovers have worse rear wheel travel than this kit, so hopefully Fox/Fabtech/others have a better solution. The expensive coilovers will also have a dial to adjust damping for desert runners.Dumb question, but what does the Coilover kit bring that this does not?
About 75β or so. Here is a pic of garage clearance. Plenty for the top plus 37s.I saw your pics in your garage the other night. What's the height on your rig now with the 35s and that lift kit. Looked like you barely squeezed in the garage. I have the same kit waiting for my truck and just curious before I invest in tires if I need to stay 35s or can go to 37s and still get in the garage.
Best I could get quickly. My driveway is on a slight pitch downhill from left to right. I can take some more tomorrow.Picture of CV angles? Does the 4 inch lift do anything to compensate for CV issues? How does it look with some droop and turn?
Wow nice ride, BTW were did you get the BOSS looking strip kit at , I love it.Had the Maxlider Stage 1 4" lift installed.
Updated with suspension pics:
Wheels are 18x9 Vision Rockers (-12 offset) and tires are BFG TA KO2s in 35x12.5x18.What are the type and specs of the rims/tires?
Not that Iβve experienced just yet.Thanks for sharing. Any problems with bumpsteer?
Thanks⦠here is the stripe I bought. Not the cheapest but, great quality and subtle design differences from others that I personally prefer. https://shop.maxliderbros.com/colle...oducts/2021-ford-bronco-vintage-stripe-4-doorWow nice ride, BTW wer
Wow nice ride, BTW were did you get the BOSS looking strip kit at , I love it.
@Bronco Finder here is another example of the same Maxlider stripe on a different canvas. I totally agree with OP on the differences from others.Thanks⦠here is the stripe I bought. Not the cheapest but, great quality and subtle design differences from others that I personally prefer. https://shop.maxliderbros.com/colle...oducts/2021-ford-bronco-vintage-stripe-4-door