- First Name
- Kelvin
- Joined
- Jan 25, 2021
- Threads
- 0
- Messages
- 70
- Reaction score
- 67
- Location
- Houston, TX
- Vehicle(s)
- Bronco Raptor, Wrangler 4xe, Rivian R1T, Ioniq 5
- Your Bronco Model
- Raptor
Yeah, mine had no bit so I had to buy it. But I know the dent is from the bolt and not drilling. Usually you get a template for even the most basic things like a tv wall mount so it was shocking that I had to assemble the frame, mark the holes, and then disassemble and remove the frame to drill. There were no instructions for setting the rivnuts so I had to look that up and it’s possible the damage occurred when setting the one rivnut that has the least clearance with the exterior panel. You wouldn’t expect them to spec a bolt that can impact the exterior panel so easily.Ford table. No installation issues. The table came with a 7/16" bit and depth gauge. I took it very slow and easy drilling, setting nutserts and securing table to avoid over depth drilling or stripping serts.
Surprisingly , no rattles even with all the hardware strapped on. I do have that intermittent top popping and some kind of dash rattle that may make me crazy though.
Sponsored