Adjusting Icon stage 7 coilovers

[Davelange]

I am trying to lower my ride height 1/2 to 1” to level out my Bronco. I was successful on the passenger side but the driver side I am not able to get spanner wrench due to the reservoir hose in the way. Has anyone experienced this and found a solution?

Sponsored

 

[AK SNO RIDER]

Get a screwdriver the same size as the holes in the collar and cut the tip off it.

 

[Baja Bronco]

Use the other end of your Icon spanner wrench.

 

[V1Rotate]

You can loosen the hose connection just enough to pivot the hose away from the shock enough to adjust

 

[Rkgzx9leftcoast]

not sure how tight the adjuster is on these , but I have seen people use a round punch about the same size as the hole, pushed into the round hole in the adjuster like an arm and turn it that way ?

 

[kodiakisland]

WD40 on the threads. Full droop. Use the handle end of the wrench.

 

[F-Spot]

Did you back out the set screw? In the pic, it looks like it is not backed out.

Edit: nvmd. looks like the first pic is the passenger side and you tightened the set screw back in after adjusting the collar. I see the set screw is backed out on the driver's side.

Sponsored