ADV Production Modular Hardtop!

[604Bronco]

I’ll check it out- thanks!

Don't get your hopes up - I just had a local dealership price this out and it was still over $12,000 CDN. I deleted the quote, but that was even with a discount on the parts. MSRP was much higher.

I assume when Ford starts mass producing MIC top kits for sale through their Parts department, it'll be cheaper. "My dealership said" that wouldn't be until Q3 2023-ish though (according to his National Ford Parts Manager) - Take that for what it's worth.

Sponsored

 

[Mortonm]

Don't get your hopes up - I just had a local dealership price this out and it was still over $12,000 CDN. I deleted the quote, but that was even with a discount on the parts. MSRP was much higher.

I assume when Ford starts mass producing MIC top kits for sale through their Parts department, it'll be cheaper. "My dealership said" that wouldn't be until Q3 2023-ish though (according to his National Ford Parts Manager) - Take that for what it's worth.

ouch $12k! glad I stuck to my guns about the hard top

 

[CarStory]

We present to you the first ADV Modular production unit, VERY exciting! We can certainty say that we are beyond impressed and happy with the finished production unit. We are DEFINITELY giving Ford a run for their money. Production is moving along VERY quickly ever since we tested, validated, and approved the prototype for production.

We will be taking more content in the coming weeks! Please let us know if we can answer any questions, we are happy to help!

Looks really good!

 

[Sonny]

Don't get your hopes up - I just had a local dealership price this out and it was still over $12,000 CDN. I deleted the quote, but that was even with a discount on the parts. MSRP was much higher.

I assume when Ford starts mass producing MIC top kits for sale through their Parts department, it'll be cheaper. "My dealership said" that wouldn't be until Q3 2023-ish though (according to his National Ford Parts Manager) - Take that for what it's worth.

M2DZ-78502G33-CA (rear cap) $2,000
M2DZ-78502G32-AA (center panel) $700
M2DZ-7850284-AA (side panel) $500

There's obviously seals, glass, and so on, but if you price it out online, it comes nowhere near $12k anymore. I would talk to one of the parts dealers in this forum.

 

[604Bronco]

M2DZ-78502G33-CA (rear cap) $2,000
M2DZ-78502G32-AA (center panel) $700
M2DZ-7850284-AA (side panel) $500

There's obviously seals, glass, and so on, but if you price it out online, it comes nowhere near $12k anymore. I would talk to one of the parts dealers in this forum.

$12,000 is CDN, not USD. And there's quite a bit of other stuff that adds up quickly. At the end of the day, it's not worth it to "build-a-MIC" for the quality of what you're getting.

 

[Sonny]

$12,000 is CDN, not USD. And there's quite a bit of other stuff that adds up quickly. At the end of the day, it's not worth it to "build-a-MIC" for the quality of what you're getting.

Whatever the exchange rate, I'm betting you can build one for less or same as an ADV top today.

 

[Kjbeggs]

Whatever the exchange rate, I'm betting you can build one for less or same as an ADV top today.

I'd take the ADV over a comparably priced MIC any day...

 

[FilmcoBronci]

We present to you the first ADV Modular production unit, VERY exciting! We can certainty say that we are beyond impressed and happy with the finished production unit. We are DEFINITELY giving Ford a run for their money. Production is moving along VERY quickly ever since we tested, validated, and approved the prototype for production.

We will be taking more content in the coming weeks! Please let us know if we can answer any questions, we are happy to help!

Looks Fantastic! Well done!
Say hi to "John". lol

 

[FatRat250]

I went to SEMA to look at the ADV top. I found it and noticed a few issues. The pictures are of the top above the rear window, where it seems to ‘bow out’ fairly far. The factory top does not do this. Is this large gap by design? If so, why does it stick out?
Additionally, where the front section meets the rear it doesn’t seem to sit flush. Do you have pictures of these areas from a ‘newer version’? Has this been resolved? Thanks!

 

[wanna1]

I went to SEMA to look at the AC top. I found it and noticed a few issues. The pictures are of the top above the rear window, where it seems to ‘bow out’ fairly far. The factory top does not do this. Is this large gap by design? If so, why does it stick out?
Additionally, where the front section meets the rear it doesn’t seem to sit flush. Do you have pictures of these areas from a ‘newer version’? Has this been resolved? Thanks!

Is that the AC or ADV top?

 

[ADV Fiberglass]

I went to SEMA to look at the AC top. I found it and noticed a few problems, but want to know if this is an early prototype or a production unit. The pictures are of the top above the rear window, where it seems to ‘bow out’ fairly far. Additionally, where the front section meets the rear it doesn’t seem to sit flush. Do you have pictures of these areas on a production one?

Good eye, just typical Sema crunch rush install issues. We will get everything perfected and get some fresh images for everyone to look at this week.

 

[ADV Fiberglass]

I'd take the ADV over a comparably priced MIC any day...

Thats what we like to hear!

 

[ADV Fiberglass]

Thank you! We are happy with the finished product and excited to start shipping soon!

 

[ADV Fiberglass]

These look fantastic, and if I had a 4-door I think I'd be heavily considering a 1-piece.
With all the floppy tops in my area, I bet the money difference between ADV's and what I could get selling the MIC top would be quite small.

The one-piece is a great option for all the customers that do not plan on using a modular roof (by removing the roof pieces)

Sponsored