ARB Dual Air Compressor Install With Grimm Offroad Mount

[Graham1911]

This install works great if you are looking for one of the few solutions for ARB twin install. I used the Grimm Offroad mount, Grimm Offroad stainless braided air hose, and wired it to Aux 6 switch.

Sponsored

 

[TheShark]

Just installed the Grimm solution last weekend. Very nice, good fit and really clean looking.

 

[Kbeas]

This install works great if you are looking for one of the few solutions for ARB twin install. I used the Grimm Offroad mount, Grimm Offroad stainless braided air hose, and wired it to Aux 6 switch.

Hi, Grimm has a hose that reaches the rear? Did you run it underneath?

 

[Graham1911]

Hi, Grimm has a hose that reaches the rear? Did you run it underneath?

Yes, I ran it under along frame rail to back bumper. See link: Hose

 

[doyouglas]

Nicely done, how long of the hose did you purchase from grim. I'm thinking of doing similar setup. Where did you get the bracket to attach the hose coupler on the rear.

 

[Graham1911]

Nicely done, how long of the hose did you purchase from grim. I'm thinking of doing similar setup. Where did you get the bracket to attach the hose coupler on the rear.

I got the 120 inch. Perfect link in my opinion. Enabled me to follow rail all the way back and across without having to stretch anything.

 

[Blaylock1988]

This is perfect, exactly what I want to do on my Bronco when I upgrade from the single I have right now.

 

[mrgrayaz]

Old thread I know, but how did you that rear air mount? I love it. Open the rear door, get the hose, plug in. Is it bolted to the hitch?

 

[Graham1911]

Old thread I know, but how did you that rear air mount? I love it. Open the rear door, get the hose, plug in. Is it bolted to the hitch?

I got the 120 inch from Grimm. Perfect link in my opinion. Enabled me to follow rail all the way back and across, zip tie without having to stretch anything. I got bracket off E Bay.

 

[Chritaka]

I just got this kit! I want to install with the ARB switch under the hood, but ALSO use an upfitter to turn it on. Can I simply use the purple wire from the ARB harness to T into the purple wire on the switch to give it power? This way I can turn on by either the under hood ARB switch or with the upfitter?

 

[Graham1911]

I just got this kit! I want to install with the ARB switch under the hood, but ALSO use an upfitter to turn it on. Can I simply use the purple wire from the ARB harness to T into the purple wire on the switch to give it power? This way I can turn on by either the under hood ARB switch or with the upfitter?

Not sure about both. I just use upfitter. It works great.

 

[CarbonSteel]

I got bracket off E Bay.

I have been waiting to install my ARB with the Grimm.

Can you link the bracket you bought?

 

[Graham1911]

I have been waiting to install my ARB with the Grimm.

Can you link the bracket you bought?

Here you go.
https://www.grimmoffroad.com/2021-Ford-Bronco-ARB-Twin-Compressor-Mounting-Bracket-Kit_p_132.html

 

[CarbonSteel]

Here you go.
https://www.grimmoffroad.com/2021-Ford-Bronco-ARB-Twin-Compressor-Mounting-Bracket-Kit_p_132.html

Sorry, I meant the bracket to mount the air chuck on the bumper. I have the ARB installed into the Grimm sitting on my bench ready to go.

 

[Graham1911]

Sorry, I meant the bracket to mount the air chuck on the bumper. I have the ARB installed into the Grimm sitting on my bench ready to go.

I actually bought this whole kit just for the bracket. It is sturdy and works perfect. I also used the Grimm 120" braided air hose to get from front to back. Perfect also. See link:
https://kleinn.com/product/1302-2/

Sponsored