- Thread starter
- #1
Well I’m cheap and I really needed a transmission skid. I figured that I could make my own cheaper than buying a skid, I have a Badlands so there are already the stock skids on the rig. I decided to start with the trans skid since there is not one and I plan on building the engine and transfer case skid next. My rig has the two cross bars so I decided to mount directly to those bars. I also have Icon coil overs and with the Icon kit they have you lower the Sway bar disconnect, Which makes the Disco skid plate the lowest point on the rig. This is another project for me to tackle in the future.
CAD drawing
I added bolt plates to the cross arms
I do still have exposed bolts, I think I might buy some domed rock washers, I don’t really have the tooling to turn those myself
CAD drawing
I added bolt plates to the cross arms
I do still have exposed bolts, I think I might buy some domed rock washers, I don’t really have the tooling to turn those myself
Sponsored
Last edited: