Can FORScan program remote keypad

[emkayw]

So I purchased the remote keypad for the door after I got my Bronco. I thought you could program it yourself, but turns out the 36-digit code needs to be entered using FDRS (dealership wanted to charge $165 to install it). Can it be programmed using FORScan instead?

Sponsored

 

[‘21OBX]

I haven’t found a way yet. but I just messed up and had to do a reset to as built in forscan and now mine doesn’t work. I had a friend do it at the dealer.

 

[a94cobra]

Used to, it was treated just like another key fob. New ones, Idk for sure.

 

[mpeugeot]

No, but this can... Without any dicking around from the dealer.

https://www.amazon.com/VXDIAG-Nano-Ford-Mazda-V100/dp/B01EFWPAN0

And it is super easy to do with FDRS Software from Ford's website.

https://www.motorcraftservice.com/diagnostic/Support?channelId=51&categoryId=304

You need to get a 2 day license for the software ($50).

 

[emkayw]

No, but this can... Without any dicking around from the dealer.

https://www.amazon.com/VXDIAG-Nano-Ford-Mazda-V100/dp/B01EFWPAN0

And it is super easy to do with FDRS Software from Ford's website.

https://www.motorcraftservice.com/diagnostic/Support?channelId=51&categoryId=304

You need to get a 2 day license for the software ($50).

Perfect, I'll give it a shot!

 

[mpeugeot]

Perfect, I'll give it a shot!

Read my thread...

https://www.bronco6g.com/forum/threads/how-to-add-a-keyless-entry-the-supereasy-edition.51446/

You don't need to put in the 48 character code. It's a 6 digit serial number and it worked without any real problems.

The keyless entry comes with a card that has 2 important codes

The Access Code which is 5 digits (#####)
The Serial Number which is 6 digits (######)

You enter the serial number into FDRS.

Sponsored