Color your Bronco with Plasti Dip

[DesertChip]

There is so many posts about the color choices available and lack of the proper choice, I thought would offer this as a solution for some. The DipYourCar productes comes in a zillion colors and finishes. You just spray it on, then you want to change it, you peel it off and do it again. Its not that expensive or hard to apply. It will also offer some protection for your real paint underneath. I am going with Oxford White and decide on a different color later.

https://www.dipyourcar.com/

Sponsored

 

[TXBoy79]

That’s pretty cool...like that you can get the sprayer in the order too! Nice.

 

[Headsong]

So what do you put on registration.?

 

[The Mountain Man]

This almost looks photoshopped.
https://www.google.com/amp/s/jalopn...cer-evolution-uses-special-pai-1845836798/amp

 

[Hoofnmouth]

Not the whole rig but i might do parts.?

 

[Old Guy]

I tried to do a whole car, with spayer. I would just say, it didnt work for me very well. Now I put myself on the low end of the patience scale for these things, so a more detailed and patient person should do ok. Spray thick, too thin and you will play hell getting it off.

 

[Hoofnmouth]

I tried to do a whole car, with spayer. I would just say, it didnt work for me very well. Now I put myself on the low end of the patience scale for these things, so a more detailed and patient person should do ok. Spray thick, too thin and you will play hell getting it off.

Thats what i use a bug sprayer i put on disposable tyvek coveralls 3 beers and party on.

 

[splathead]

I wonder if this would work on the mic top?

 

[Old Guy]

I wobder if this would work on the mic tip?

Might, pretty adhesive. If you spray on thick, it does come off easy. I rattle caned my poor 89 Fox body, and peeled right off after my wife threatened to report me to neighborhood for ugliest car imagined. I have considered trying it on the top where you can't see, and see what I think.

 

[Mpatient1]

it's what I am planning thinking VB or CO and dip the top/fender flares white. when I get tired of the body color then go from there. No idea what to do with registration, what do you do if you wrap it?

 

[splathead]

I wobder if this would work on the mic tip?

Sorry, must have been drunk when I typed this.

 

[ILoveTacos]

This would be my choice.

 

[Rogues Gambit]

Definitely has my attention

 

[BigCatKale]

I used dip on the front of my hood and grill on my FJ for the look. Eventually did the mirrors as well after I noticed that it had an uncanny knack of repelling bugs and protecting paint from chips. A buddy still has his 2012, and with minor touch ups every couple years is as good when we first added it. So definitely can be done and can last quite a while. That said, Not sure about a whole vehicle without more frequent maintenance. It fades in the sun over time to a more matte finish. Varied by sun exposure as well, so more hood than grill, etc. Could be tough to keep even looking.

As for MIC, I am thinking of buying a gallon of commercial semi-gloss bed liner and doing that. Did a whole FZJ80 with failed finish and it looked and worked amazing. Maybe worth a shot if the gray is not to my liking. The whole rig is a hell of a commit at $30-$60k new sticker though!

Sponsored