- First Name
- Ken
- Joined
- Jan 26, 2023
- Threads
- 3
- Messages
- 13
- Reaction score
- 9
- Location
- Stewartsville Nj
- Vehicle(s)
- 4)96 F-150 52F-1 Jeep-TJ SDF2507.3 Suzuki
- Your Bronco Model
- Base
- Thread starter
- #1
2023 2-door basequatch
ARB rear bumper 5680020 for narrow flares going on a wide flare Sasquatch.
I had trouble finding photos of this fitment… but I was sure it would look better than the wide option.
I will be installing the ARB Summit bumper on the front
From the photos it looks like it sits inboard of the front flares which I wanted the rear to match.
Below are photos. The front will be installed this week.
the driver side arb frame bracket needed to be modified to bolt up. I was forced to open up two of the holes to complete the install.
the arb license plate bracket does not work with the AEV Salta XR wheels. So at 1:30am I decided to cut up the supplied bracket then weld it up as a hitch mount, it’s rough now but I think I like the idea
I installed Curt trailer wiring. I decided to cut the stock rear bumper wiring harness (for the license plate light) and use that as my 12v source for the curt modulite , then I put a trailer plug on my hitch mount license plate. Finished up around 3am
ARB rear bumper 5680020 for narrow flares going on a wide flare Sasquatch.
I had trouble finding photos of this fitment… but I was sure it would look better than the wide option.
I will be installing the ARB Summit bumper on the front
From the photos it looks like it sits inboard of the front flares which I wanted the rear to match.
Below are photos. The front will be installed this week.
the driver side arb frame bracket needed to be modified to bolt up. I was forced to open up two of the holes to complete the install.
the arb license plate bracket does not work with the AEV Salta XR wheels. So at 1:30am I decided to cut up the supplied bracket then weld it up as a hitch mount, it’s rough now but I think I like the idea
I installed Curt trailer wiring. I decided to cut the stock rear bumper wiring harness (for the license plate light) and use that as my 12v source for the curt modulite , then I put a trailer plug on my hitch mount license plate. Finished up around 3am
Sponsored