Yeah I was checking those out on the BDS Half Cab at Off-Road Expo and I think that's the cleanest solution. I might need to get that kit for my personal Bronco, but the ICON Bronco has to keep the crash bar mounts intact until we're done developing parts.
That's pretty good, actually; relocating the solenoid would open it up even more but I'd say that's personal preference at that point.This is what it looks like with a Warn EVO 10S:
So yeah, the top of the winch solenoid pack blocks the bottom of the screen a bit. But it's not as bad as with some winch bumpers I've seen. I've personally wheeled this Bronco in Moab, Big Bear, and Sand Hollow and found the blocked lower portion of the camera view to be a minor annoyance but not a dealbreaker.
We do not.
Tackle the toughest trails with the PRO Series Front Winch Bumper from ICON! Designed for the ultimate in off-road form and function, PRO Series features a multi-faceted, high-clearance design that slips past the tightest obstacles. Tapered ends protect the Bronco's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles.
The integrated semi-recessed winch mount places the winch tight to the vehicle, allowing increased airflow through the radiator while preserving the Bronco's excellent approach angle. The winch fairlead mount is integrated right into the front surface of the bumper. If you do manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel.
The bumper comes with provisions to retain the Bronco's parking sensors (caps are provided for Broncos without sensors). A removable aluminum mesh panel promotes airflow through the Bronco's intercooler. The bumper is fabricated from CNC laser cut, precision brake-formed 3/16 plate steel. The bumper looks as great as it performs, with a durable, semi-gloss black powder coat finish.
FEATURES & BENEFITS
- Reinforced mounting for up to 12,000 lb. winch including Warn ZEON
- Faceted, high-clearance bumper design to maximize approach angle and off-road performance
- Top-mount winch location allows easy access to the drum and keeps the winch up out of the mud and rocks
- Parking sensor mounts with bezels or caps for Broncos without sensors
- Extreme duty 1" thick recovery shackle tabs are angled for high clearance
- 3/16" thick plate steel construction, CNC laser cut and brake-formed
- Replaceable 10GA Aluminum mesh allows maximum air flow to intercooler
- 3/8-16” threaded holes on top plate can be used to mount most LED lights (sold separately)
- Easy bolt-on installation with no cutting or drilling
- Durable satin black powder coat finish
- ICON Impact Series Limited Lifetime Warranty
TECH INFO:
The PRO Series Front Winch Bumper is available now to order from your favorite ICON Dealer or direct from ICON. Note that our dealer communication for this New Product Announcement was just sent out this morning so it may take a few days for some dealers to digest and implement this information. Any questions, just ask
- Requires ACC Relocation Kit on vehicles equipped with Adaptive Cruise Control (ACC). ICON Part # 45209 (sold separately)
- Recovery shackle tabs CNC machined from 1” thick steel plate, for 3/4” shackle pin (5/8” shackle)
- Optional Front Skid Plate ICON Part #45207 (sold separately)
- Optional Diff Skid Plate ICON Part #45208 (sold separately)
- Compatibility with Bronco Raptor not yet confirmed
Good looking product and not too portly for steel.Tackle the toughest trails with the PRO Series Front Winch Bumper from ICON! Designed for the ultimate in off-road form and function, PRO Series features a multi-faceted, high-clearance design that slips past the tightest obstacles. Tapered ends protect the Bronco's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles.
The integrated semi-recessed winch mount places the winch tight to the vehicle, allowing increased airflow through the radiator while preserving the Bronco's excellent approach angle. The winch fairlead mount is integrated right into the front surface of the bumper. If you do manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel.
The bumper comes with provisions to retain the Bronco's parking sensors (caps are provided for Broncos without sensors). A removable aluminum mesh panel promotes airflow through the Bronco's intercooler. The bumper is fabricated from CNC laser cut, precision brake-formed 3/16 plate steel. The bumper looks as great as it performs, with a durable, semi-gloss black powder coat finish.
FEATURES & BENEFITS
- Reinforced mounting for up to 12,000 lb. winch including Warn ZEON
- Faceted, high-clearance bumper design to maximize approach angle and off-road performance
- Top-mount winch location allows easy access to the drum and keeps the winch up out of the mud and rocks
- Parking sensor mounts with bezels or caps for Broncos without sensors
- Extreme duty 1" thick recovery shackle tabs are angled for high clearance
- 3/16" thick plate steel construction, CNC laser cut and brake-formed
- Replaceable 10GA Aluminum mesh allows maximum air flow to intercooler
- 3/8-16” threaded holes on top plate can be used to mount most LED lights (sold separately)
- Easy bolt-on installation with no cutting or drilling
- Durable satin black powder coat finish
- ICON Impact Series Limited Lifetime Warranty
TECH INFO:
The PRO Series Front Winch Bumper is available now to order from your favorite ICON Dealer or direct from ICON. Note that our dealer communication for this New Product Announcement was just sent out this morning so it may take a few days for some dealers to digest and implement this information. Any questions, just ask
- Requires ACC Relocation Kit on vehicles equipped with Adaptive Cruise Control (ACC). ICON Part # 45209 (sold separately)
- Recovery shackle tabs CNC machined from 1” thick steel plate, for 3/4” shackle pin (5/8” shackle)
- Optional Front Skid Plate ICON Part #45207 (sold separately)
- Optional Diff Skid Plate ICON Part #45208 (sold separately)
- Compatibility with Bronco Raptor not yet confirmed
This is great! I love this design. Couple questionsTackle the toughest trails with the PRO Series Front Winch Bumper from ICON! Designed for the ultimate in off-road form and function, PRO Series features a multi-faceted, high-clearance design that slips past the tightest obstacles. Tapered ends protect the Bronco's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles.
The integrated semi-recessed winch mount places the winch tight to the vehicle, allowing increased airflow through the radiator while preserving the Bronco's excellent approach angle. The winch fairlead mount is integrated right into the front surface of the bumper. If you do manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel.
The bumper comes with provisions to retain the Bronco's parking sensors (caps are provided for Broncos without sensors). A removable aluminum mesh panel promotes airflow through the Bronco's intercooler. The bumper is fabricated from CNC laser cut, precision brake-formed 3/16 plate steel. The bumper looks as great as it performs, with a durable, semi-gloss black powder coat finish.
FEATURES & BENEFITS
- Reinforced mounting for up to 12,000 lb. winch including Warn ZEON
- Faceted, high-clearance bumper design to maximize approach angle and off-road performance
- Top-mount winch location allows easy access to the drum and keeps the winch up out of the mud and rocks
- Parking sensor mounts with bezels or caps for Broncos without sensors
- Extreme duty 1" thick recovery shackle tabs are angled for high clearance
- 3/16" thick plate steel construction, CNC laser cut and brake-formed
- Replaceable 10GA Aluminum mesh allows maximum air flow to intercooler
- 3/8-16” threaded holes on top plate can be used to mount most LED lights (sold separately)
- Easy bolt-on installation with no cutting or drilling
- Durable satin black powder coat finish
- ICON Impact Series Limited Lifetime Warranty
TECH INFO:
The PRO Series Front Winch Bumper is available now to order from your favorite ICON Dealer or direct from ICON. Note that our dealer communication for this New Product Announcement was just sent out this morning so it may take a few days for some dealers to digest and implement this information. Any questions, just ask
- Requires ACC Relocation Kit on vehicles equipped with Adaptive Cruise Control (ACC). ICON Part # 45209 (sold separately)
- Recovery shackle tabs CNC machined from 1” thick steel plate, for 3/4” shackle pin (5/8” shackle)
- Optional Front Skid Plate ICON Part #45207 (sold separately)
- Optional Diff Skid Plate ICON Part #45208 (sold separately)
- Compatibility with Bronco Raptor not yet confirmed
Looks great!Tackle the toughest trails with the PRO Series Front Winch Bumper from ICON! Designed for the ultimate in off-road form and function, PRO Series features a multi-faceted, high-clearance design that slips past the tightest obstacles. Tapered ends protect the Bronco's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles.
The integrated semi-recessed winch mount places the winch tight to the vehicle, allowing increased airflow through the radiator while preserving the Bronco's excellent approach angle. The winch fairlead mount is integrated right into the front surface of the bumper. If you do manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel.
The bumper comes with provisions to retain the Bronco's parking sensors (caps are provided for Broncos without sensors). A removable aluminum mesh panel promotes airflow through the Bronco's intercooler. The bumper is fabricated from CNC laser cut, precision brake-formed 3/16 plate steel. The bumper looks as great as it performs, with a durable, semi-gloss black powder coat finish.
FEATURES & BENEFITS
- Reinforced mounting for up to 12,000 lb. winch including Warn ZEON
- Faceted, high-clearance bumper design to maximize approach angle and off-road performance
- Top-mount winch location allows easy access to the drum and keeps the winch up out of the mud and rocks
- Parking sensor mounts with bezels or caps for Broncos without sensors
- Extreme duty 1" thick recovery shackle tabs are angled for high clearance
- 3/16" thick plate steel construction, CNC laser cut and brake-formed
- Replaceable 10GA Aluminum mesh allows maximum air flow to intercooler
- 3/8-16” threaded holes on top plate can be used to mount most LED lights (sold separately)
- Easy bolt-on installation with no cutting or drilling
- Durable satin black powder coat finish
- ICON Impact Series Limited Lifetime Warranty
TECH INFO:
The PRO Series Front Winch Bumper is available now to order from your favorite ICON Dealer or direct from ICON. Note that our dealer communication for this New Product Announcement was just sent out this morning so it may take a few days for some dealers to digest and implement this information. Any questions, just ask
- Requires ACC Relocation Kit on vehicles equipped with Adaptive Cruise Control (ACC). ICON Part # 45209 (sold separately)
- Recovery shackle tabs CNC machined from 1” thick steel plate, for 3/4” shackle pin (5/8” shackle)
- Optional Front Skid Plate ICON Part #45207 (sold separately)
- Optional Diff Skid Plate ICON Part #45208 (sold separately)
- Compatibility with Bronco Raptor not yet confirmed
I hope so, but not any time soon I'm afraid. I've lobbied hard for it but the initial concept our designer came up with got rejected in design review and I haven't seen anything else on it. I've tried to impress on our new products team how important it is for Bronco folks to be able to hang lights everywhere LOL.
The rear bumper tucks up as much as we could, with the underlying hardware Ford left in our way LOL.2. Will the matching rear bumper be tucked up as nicely as this??
Can't wait to see what y'all have coming for sliders too...might be a 1-stop shop for me.
I'm afraid you're going to be disappointed regarding the license plate. It's simply not possible to keep it on the bumper and still try to tuck the ends of the bumper up for clearance. We will have a spare tire relocation for it.Love the look. I have a feeling your team may make the winning rear bumper I’ve been waiting for. Will pair up nicely with the adjustable track bar
(Just please include a license plate location - hanging a plate off the spare is a big no for me).
I was worried about that. Makes sense. I guess it can cover the Ford logo…I’ll keep an eye out.
