Light Switches beyond AUX

[Inlinejohn]

Curious what style and where most are locating extra light,etc switches that are beyond the 6 AUX factory switches?

I’m starting to plan out my switch usage:

1) 40” Lightbar in front on Rack
2) Ditch lights
3) Side campground lights mounted to something
4) Rear bumper lights inside the bumper cutouts
5) Rear Chase light mounted to rear rack crossbar
6) Fridge (necessary?)
7) etc

This is a science project!!!!

Sponsored

 

[thatspecialbeat]

Did an always powered rocker in the rear for lights.

Good question about other switch locations.

I have additional lights mounted up front for the interior but they aren't wired yet because I haven't figured out how I want to mount a switch for those. Don't want to use the aux switches because they only work with power on. I also don't want them to come on with the stock interior lights because I only want the bright light when I need it.

 

[Inlinejohn]

Bump....I can't believe nobody has mounted extra switches. I'd love to see your choices and locations to try and make it look OEM

 

[JediMcMuffin]

Bump....I can't believe nobody has mounted extra switches. I'd love to see your choices and locations to try and make it look OEM

I intend to get a SwitchPro and mount the control unit to a 67D arm all the way on the left side of the windshield above the air vent. Currently my Yaesu control panel is there. I too want a few more switches, and I hear the SwitchPros can do things like dim lights.

 

[Tye]

You could look into adding a SwitchPro or sPOD

Here is a nice under the hood mount for the Switchpro: https://store.switchpros.com/2021-bronco-mounting-kit/

 

[Inlinejohn]

some good conversation over here:

https://www.bronco6g.com/forum/threads/lets-talk-aux-switches-what-are-your-plans.26672/

 

[Inlinejohn]

 

[Bruno]

You could look into adding a SwitchPro or sPOD

Here is a nice under the hood mount for the Switchpro: https://store.switchpros.com/2021-bronco-mounting-kit/

I love learning on this site thats amazing

 

[Inlinejohn]

 

[Inlinejohn]

maybe here?

 

[Inlinejohn]

 

[Tye]

maybe here?

here it is mounted in that location

 

[Inlinejohn]

here it is mounted in that location

LOVE it

 

[Tye]

if i were installing it there, i would just drill a hole in the panel so the wiring is completely hidden.

 

[Inlinejohn]

https://www.nvautoparts.com/what-size-wire-should-i-use-for-my-led-light-bar/

Sponsored