Rockslide Engineering Steps - GROUP BUY has started!

[OpenAir25]

Not sure I’m liking the shortness of these. We will see.
Is there an on and off switch so if I take the doors off the steps won’t come down?
Thanks!

Sponsored

 

[Herbie]

Not sure I’m liking the shortness of these. We will see.
Is there an on and off switch so if I take the doors off the steps won’t come down?
Thanks!

Yup. There is also a door delete kit that you can add on in case you want them to continue to be functional with doors off.

 

[BroncoKong Jr.]

Pics of my door delete kit buttons for the curious:

That's under and to the back of the front seats in a 4-door. There's a little plastic fastener in that location that pops out where you can mount them.

I need to make the passenger side wiring prettier. edit: and it looks like I installed that bracket upside-down

 

[CypressCajun]

***SALE HAS ENDED.....
BUT....Ill start round 2 Feb 3rd!



I have started the pre-sale/group buy for 2door and 4door Rockslide Engineering Steps.

**Rockslide Engineering - GROUP BUY!**
**2 dr & 4dr models available. MUST MESSAGE ME FOR PRICING.**

***I cannot post sale pricing here.***
**This is a PRE-SALE. The steps will take 4-6 weeks to ship**
heres a video of what they do.. https://www.youtube.com/watch?v=AvJK3IjIgVQ​

If you are in, reply to this post and also private message me. Thank you! We are already at 14 sets ordered on FB.

Any update on batch 2 shipping?

 

[TXArea51]

I have the next size down on the way, should be here Wednesday. I can let you know.

Any update?

 

[TXArea51]

Started mounting the steps last night, got driver side mounted.

 

[buzzcutt2]

I’m sure I was the only lucky one…but double check that the pins holding the step are fully seated and the e-clip is in place. The e-clips were missing on my drivers side and the pins weren’t fully seated, I didn’t realize until the step got out of place and it wouldn’t fully retract. RSE got me squared away and all is good.

 

[Herbie]

Any update?

Didn't fit.

 

[Herbie]

Started mounting the steps last night, got driver side mounted.

Just mounted mine today.

 

[TXArea51]

Just mounted mine today.

Just finished install..

 

[TXArea51]

Has anyone added the step slider light kit? Thinking of going the DIY route.

 

[mds5917]

Has anyone added the step slider light kit? Thinking of going the DIY route.

It’s as simple as can be. Tape them in place and plug right into their harness.

 

[2Jeeps&PatriotX1]

Has anyone added the step slider light kit? Thinking of going the DIY route.

Only thing I don't like is that the light kit doesn't light up the rear section of the step for the rear doors (well least on 4doors, no idea about 2 door).

 

[TXArea51]

Only thing I don't like is that the light kit doesn't light up the rear section of the step for the rear doors (well least on 4doors, no idea about 2 door).

So I didnt order the kit but ordered the connectors and lights from amazon to make them plug and play. Spent $35 on materials. Lights come in 2 strands of 4 making it 12 lights per side but also have connectors to just connect 2, 3 or all 4.

 

[Doetsch Off-Road]

Early Feb orders started shipping today...

Sponsored