- First Name
- Chad
- Joined
- Mar 6, 2020
- Threads
- 4
- Messages
- 419
- Reaction score
- 1,006
- Location
- Schereville Indiana
- Vehicle(s)
- 01 f350
- Your Bronco Model
- Black Diamond
Will this work on a 2 door.
Sponsored
so.... 4wp.....From everything I understand, RC is pretty much what would happen if Harbor Freight started selling truck accessories.
Unfortunately, short arm ifs and run of the mill cv axle joints require a diff drop to prevent the axle shaft from exceeding its operating angle. The last litebrite video showed how easy the cv joint lost its balls due to a simple 2" lift and 37's.Typical diff drop garbage.
Ignore guys like him. RC is a great affordable way to lift. It’s not the best but far from the worse. They were terrible in past but have massively improved sense thenI’ve heard this but I haven’t heard why. Genuinely curious as I’m new to this.
Bds is some nice stuff for sure, I drove a Bronco overnight as a loaner that has the RC 3.5" lift and it actually road really nice. Does the bds drop the front diff like RC? All the coil over lifts I see are.just shocks and A arms from BDS. Nothing to keep the geometry the same which would equal more stress on the drive shafts and CV axles. Zone stuff doesn't and looks really cheap and turned !e off if the Zone stuff.We have removed RC lifts to put on BDS lifts for customers in the past mainly because of ..... ride quality.
Cheap lift, cheap ride.
Heard that lift kit is trash quality?
Looks badass! How does it ride compared to stock?Been running this for about a month now with no complaints. Had a Zone 3 inch prior to this and you cannot tell the difference in ride quality, have had other riders with me with both set-ups and they agree.
Are those 38s?Been running this for about a month now with no complaints. Had a Zone 3 inch prior to this and you cannot tell the difference in ride quality, have had other riders with me with both set-ups and they agree.