- First Name
- Michael
- Joined
- May 12, 2021
- Threads
- 3
- Messages
- 17
- Reaction score
- 6
- Location
- Clearwater
- Vehicle(s)
- Jeep Grand Cherokee
- Your Bronco Model
- Big Bend
- Thread starter
- #16
here's where in confused... there's 3 wires in each of the harnesses, (a ground, and one each for the DRL and other light) obviously the 6 grounds you can run together, what did you do with the 12 remaining wires? hooked them all up to switch 1?I ended up using two switches. Switch one (30 amp) for the white LED. And switch 3 for the drl. The total amps for 6 lights was 18 amps so if you want them all on one you have to use switch 1 and I’m ok with it. Switch 2 should be plenty for most light bars that’s my plan for switch 2.
Sponsored