Sasquatch rims/tires on Badlands Question

[96GreenBronco]

Just wondering if anyone knows if there are any issues/needed modifications. I have a standard 2021 4dr badlands 7MT, have an opportunity to get someone's Sasquatch takeoff wheels and tires. Will there be any issues with fit/rubbing, etc?

From poking around it sounds like it will sit about a half inch lower, I may need to remove the bars in front of my existing tires and I may need to change tire size in the computer, anything else?

Thanks in advance for any responses

Sponsored

 

[Eroc88]

I have sas take off on my non sas BL with K02 and they fit without any rubbing with the crash bars removed. I believe anything bigger than a 35, you will need a lift to clear the upper control arms.

 

[Shoresy]

Did similar a very similar swap on my ‘21 BL MT. Remove crash bars. Did quite a few twisty/bendy trails and no rubbing issued. Speedo and odo will be about 3% off.

 

[Bronc6g22]

Everglades (SAS) wheels and 315/70r17 KO2s went on this weekend. Works and looks great! I still need to reprogram tire size.

 

[96GreenBronco]

Those look great, I love the KO2s, ill probably get them after these wear out, although i saw somewhere ko3s were coming out later this year... Do you have any issues with the standard flares not offering enough protection?

has anyone gone in and changed the tire size in the computer, just wondering how hard it is

 

[Mattyfly42]

On this same note. I have a chance to get some SAS takeoff rims. Can I fit my existing badlands ko2's on the sas rims? And what would the stance be like if so? Not sure I want new tires yet. Thanks.

 

[Bubbbba]

On this same note. I have a chance to get some SAS takeoff rims. Can I fit my existing badlands ko2's on the sas rims? And what would the stance be like if so? Not sure I want new tires yet. Thanks.

This is not mine but I did same, 285 ko2 on SAS rims after saw this photo.

 

[Bubbbba]

On this same note. I have a chance to get some SAS takeoff rims. Can I fit my existing badlands ko2's on the sas rims? And what would the stance be like if so? Not sure I want new tires yet. Thanks.

Here is mine - no down the line shot available

 

[Mattyfly42]

so there would be no issues putting my tires on? Crash bars? does it have more poke?

 

[Bronc6g22]

so there would be no issues putting my tires on? Crash bars? does it have more poke?

You will have near inch more poke than stock. No issues. Most of the tread will be under the flare.

FYI: 35s tuck into the stock flares nicely if you ever decide to up-size.

 

[Strizzo]

Those look great, I love the KO2s, ill probably get them after these wear out, although i saw somewhere ko3s were coming out later this year... Do you have any issues with the standard flares not offering enough protection?

has anyone gone in and changed the tire size in the computer, just wondering how hard it is

The ranger raptor that launched this week has KO3s, assuming they will be available by the time they start producing them.

 

[Mattyfly42]

You will have near inch more poke than stock. No issues. Most of the tread will be under the flare.

FYI: 35s tuck into the stock flares nicely if you ever decide to up-size.

Thank you. Appreciate the info.

 

[Mattyfly42]

Here is mine - no down the line shot available

Are your sas rims on badlands tires? And did it sit lower when you put them on?

 

[Hdscreens]

I thought going from regular badlands 33” tire to 35” would sit higher not lower?

From poking around it sounds like it will sit about a half inch lower, I may need to remove the bars in front of my existing tires and I may need to change tire size in the computer, anything else?

Thanks in advance for any responses

 

[Sardine]

Everglades (SAS) wheels and 315/70r17 KO2s went on this weekend. Works and looks great! I still need to reprogram tire size.

I'll be slapping 315/70r17s on my stock badlands when it arrives this month. My only concern is rubbing at full articulation. I know there's no issues with normal driving but does anyone know if it would rub when fully articulated?

I know its only .46" difference between Sasquatch and non but just curious if that's enough to cause issues.

Sponsored