Vin#

[dinkdonk]

got my window sticker. got my vin# however no call from my dealership.

also my vin# and 2door bronco shows on their website as “in stock”….. mmhmmm?

y’all should check your dealerships website for the same.

gonna call colorado tomorrow.

Sponsored

 

[Theherofails]

Does it show 'in stock' and 'in transit' or just 'in stock'?

 

[dinkdonk]

“in stock”….

 

[mpeugeot]

Would love to help, but without your VIN or a copy of the sticker... kinda hard to tell you anything useful.

But you can track it yourself. Good luck.

 

[dinkdonk]

Would love to help, but without your VIN or a copy of the sticker... kinda hard to tell you anything useful.

But you can track it yourself. Good luck.

Going to give them a call tomorrow. i’m able to track it. however it still shows “in production”. no build date. but i do have a vin#, window sticker and it’s at the dealership. weird.

 

[mpeugeot]

Going to give them a call tomorrow. i’m able to track it. however it still shows “in production”. no build date. but i do have a vin#, window sticker and it’s at the dealership. weird.

What was your blend date???

https://shop.ford.com/aemservices/shop/vot/api/customerorder/?vin=1FMXE5XXXMLA#####&orderNumber=XXXX

Order number is case sensitive

 

[dinkdonk]

What was your blend date???

https://shop.ford.com/aemservices/shop/vot/api/customerorder/?vin=1FMXE5XXXMLA#####&orderNumber=XXXX

Order number is case sensitive

that link doesn’t work
i only have “in production” date 7/12/2021

 

[mpeugeot]

that link doesn’t work
i only have “in production” date 7/12/2021

What do you mean, it doesn't work, it works fine, especially if you got data back that matched your vehicle.

More than likely, it is because your vehicle may not have actually been built yet. Remember that there was a production line shutdown or you might be stuck in a QA hold. If you didn't see a release date, then it is likely that it has not left MAP.

 

[JBrew]

“in stock”….

Where are you seeing that? Which tracker or website?

Also, when you say that the link didn't work, did you just click it?

Try this instead ... https://shop.ford.com/aemservices/s...derNumber=XXXX&partAttributes=BP2_.*&vin=YYYY

It requires a little manual intervention to work correctly. Where it says orderNumber=XXXX change the XXXX to your 4 digit order number and where it says vin=YYYY change the YYYY to your vin#.

 

[HoosierDaddy]

What do you mean, it doesn't work, it works fine, especially if you got data back that matched your vehicle.

More than likely, it is because your vehicle may not have actually been built yet. Remember that there was a production line shutdown or you might be stuck in a QA hold. If you didn't see a release date, then it is likely that it has not left MAP.

It doesn't work.
https://www.bronco6g.com/forum/thre...n-order-number-get-your-window-sticker.15328/

 

[HoosierDaddy]

What do you mean, it doesn't work, it works fine, especially if you got data back that matched your vehicle.

More than likely, it is because your vehicle may not have actually been built yet. Remember that there was a production line shutdown or you might be stuck in a QA hold. If you didn't see a release date, then it is likely that it has not left MAP.

It doesn't work. If your going to post a link, post a version that works.
Like this:
https://www.bronco6g.com/forum/thre...n-order-number-get-your-window-sticker.15328/

Or this:
https://www.f150gen14.com/forum/pages/tracker/

From either of these links, fill in your VIN and order number.

 

[BTomorama]

"In Stock" on your dealer's website likely just means that your VIN has been assigned to their system and it automatically adds it.

Window stickers are not assigned until you are 1 week from your planned build day.

If you look at the top of the window sticker, it should say "blend date" and some numbers. Those numbers are the day where they complete the main final assembly of your rig. There will still be time after this till it ships, but this means you are close (pending they don't shut down...).

Eventually you will get a confirmation after its shipped (some have been up to 2 weeks after it was produced) and a delivery window when you might see it.

Sounds like your dealer is just shitty with their communication. Welcome to Ford.
#mydealerwasamazing

 

[BroncoJay]

What do you mean, it doesn't work, it works fine, especially if you got data back that matched your vehicle.

More than likely, it is because your vehicle may not have actually been built yet. Remember that there was a production line shutdown or you might be stuck in a QA hold. If you didn't see a release date, then it is likely that it has not left MAP.

I’ve never had luck with this link. It wants me to download it and then once you do it shows “gibberish “
And I know my rig has been built....

Just sayin...

 

[Evolkidbell]

that link doesn’t work
i only have “in production” date 7/12/2021

If the date under "In Production" is supposed to be the build date. If it matches your "Blend Date" within a day or two, it's safe to say it's built.
There are a bunch of builds from the last week of June and the second week of July that were held for QC issues. If you have a build with a MIC top, you can likely blame that.

 

[Vtfakie]

It doesn't work. If your going to post a link, post a version that works.
Like this:
https://www.bronco6g.com/forum/thre...n-order-number-get-your-window-sticker.15328/

Or this:
https://www.f150gen14.com/forum/pages/tracker/

From either of these links, fill in your VIN and order number.

The link works fine, he can't post the link specific to someone else's build without knowing the VIN and order number. Swap your info into the query string and it returns data.

It's an API call, so it isn't going to be pretty to read unless you are used to reading JSON. Essentially the same data that is being shown on the 6G VIN tool, but with some other extra data.

Sponsored