What changes have you made to your Bronco using ForScan?

[IDyeti]

Disabled the 12v time out.
Disabled ASS.
Added Baja mode.
Dsiabled double honk.

Sponsored

 

[Gluestick]

• Disabled double honk
• Enabled front fogs
• Enabled fogs with high beams
• Added Sport mode

 

[Bill K]

What changes have you made to your Bronco using ForScan?

Enabled factory fog lights after changing out Ford switch and tapping into the wireharness for added fog lights. Great info on this site for that job! Will have to try some of the other popular items listed here when time permits...

 

[Headsong]

Does double honk stay off after sw update?

 

[userdude]

1. Enabled "Puttin' on the Ritz" autoplay for the mall crawl mode
2. Enabled "Korn - Blind" autoplay for offroad modes
3. Turned down the beer cooler temp to just below freezing
4. Tuned double-honk to bang out "Low Rider", the Cheech and Chong version

That 'bout covers it.

 

[murphtron]

One thing I'd like is to be able to control the number of turn signal flashes that a half-press initiates. I've seen in other cars where you can set it to 3, 5, or 7. (Not sure what's wrong with 4 or 6--if this were my software, I'd give an option between 3 and 7.)

@timhood did you ever find this setting? Would love to increase to 7ish blinks

 

[rblock50]

For those of you have have the global window enabled, what is the sequence to roll them down? I have Lux, so it looks like it’s already setup in forscan, but I can’t get it to work. Is it one click and hold, two quick clicks and hold, etc? I seem to be able to do the windows up though.

 

[Fly]

For those of you have have the global window enabled, what is the sequence to roll them down? I have Lux, so it looks like it’s already setup in forscan, but I can’t get it to work. Is it one click and hold, two quick clicks and hold, etc? I seem to be able to do the windows up though.

try click unlock then click and hold unlock for 7 sec

 

[SevenT]

Tire size (1st to 35s and 2nd to 37s)
TPMS down to 15
Changed key fob panic button to off
Disabled double-honk
Added Sport mode
Changed gear ratio from 4.46 to 4.7
Oracle flush mount tail light mods

 

[timhood]

Tire size (1st to 35s and 2nd to 37s)
TPMS down to 15
Changed key fob panic button to off
Disabled double-honk
Added Sport mode
Changed gear ratio from 4.46 to 4.7
Oracle flush mount tail light mods

I hesitated to drop my TPMS too low because, in my Escape, it will complain if the tires are over-inflated. Does the Bronco not do that? I'd love to get rid of the warning when we off-road. Or, actually, just not have it go off when we air down so that if it does go off, I know it's probably because of a flat and that I should pay attention to it.

 

[timhood]

@timhood did you ever find this setting? Would love to increase to 7ish blinks

I don't know that anyone has figured out if it's possible or where to do it in 2020+ vehicles. All of the information I found referenced SCCM 724-01-01 working in several models pre-2020, but no longer after 2020. It seems really dumb to me that it would be removed entirely, so my guess is that it just got moved to a different location that nobody has found yet.

 

[redone17]

Changed gear ratio from 4.46 to 4.7

You upgraded your axles as well, correct?

You just reminded me that I never changed my TPMS…I gotta do that still.

 

[SevenT]

I hesitated to drop my TPMS too low because, in my Escape, it will complain if the tires are over-inflated. Does the Bronco not do that? I'd love to get rid of the warning when we off-road. Or, actually, just not have it go off when we air down so that if it does go off, I know it's probably because of a flat and that I should pay attention to it.

They do not complain about being overinflated. In addition, they do not bother me when I am aired down offroad.

 

[SevenT]

You upgraded your axles as well, correct?

You just reminded me that I never changed my TPMS…I gotta do that still.

I have the M210 FDU and the M220 rear axle. I was not aware that the axles were different from non-Squatched and Squatched.

 

[redone17]

I have the M210 FDU and the M220 rear axle. I was not aware that the axles were different from non-Squatched and Squatched.

I guess I’m confused. You have a Sasquatch Badlands that comes with the 4.7 gear ratio, correct? The non-Sasquatch has 4.46 (as does my Black Diamond).

What exactly did you change in Forscan?

Sponsored