Coming soon…. Kicker Key 200.4 mounting plate from Mountains2Metal

[da_jokker]

Maybe you should just make a Mollie panel for above the glove box ;p

Sponsored

 

[Pugsly]

I have it on good word that this will be around 30 dollar range

If its $30 I will get one and use that to mount my FTM-400

 

[niterider006]

That’s where mine is going too

Just be careful with that metal plate underneath the steering column. I was taking my amp off and my hand slipped right down to the bone. A few stitches later:

 

[22OBX]

Just be careful with that metal plate underneath the steering column. I was taking my amp off and my hand slipped right down to the bone. A few stitches later:

Ouch...thanks. Duly noted. I'll probably install mine Saturday.

 

[DaveInSA]

Just be careful with that metal plate underneath the steering column. I was taking my amp off and my hand slipped right down to the bone. A few stitches later:

You haven't officially done anything unless you come out with blood stains and a least one new hole in your body. It's a requirement when working on vehicles.

 

[22OBX]

You haven't officially done anything unless you come out with blood stains and a least one new hole in your body. It's a requirement when working on vehicles.

You don't have to tell me. I just coyote swapped my '73 and been busting knuckles. bleeding everywhere...but it was worth it. I'll split seat time between my Bronco and my '73.

 

[RainbowStix]

If its $30 I will get one and use that to mount my FTM-400

That would be crazy if this plate had holes for that too, would have to consider moving my amp

 

[Mountains2Metal]

Making some slight adjustments for the Midland MXT275.

 

[ATbronco]

Nope mine is on the plate under the steering column. It’s almost like it was made for it.

pic?

 

[F OR D]

doing an install next weekend, when is this thing ready and for how much?

 

[Copperhorse73]

doing an install next weekend, when is this thing ready and for how much?

@Mountains2Metal , this question is for you

 

[Mountains2Metal]

doing an install next weekend, when is this thing ready and for how much?

@Mountains2Metal , this question is for you

We made some changes to this bracket last week and are expecting to have these ready to order later this week. Price point will be around $30. Will come with a hardware bag as well for a few options on what goes on to the bracket. I will plan on doing an install on my 275 next weekend as well. The antenna mount is working through the shop right now. That may not be painted and ready until the week following.

 

[Mountains2Metal]

Went live this afternoon. I am using mine for the Midland GMRS radio. Install video will be done when the antenna mount is ready.

https://mountains2metal.com/product/br6udm/

 

[DaveInSA]

Went live this afternoon. I am using mine for the Midland GMRS radio. Install video will be done when the antenna mount is ready.

https://mountains2metal.com/product/br6udm/

hopefully got my order in, said 3 left when I started the checkout

 

[Aztec1382]

Placed the order
Hopefully it ships soon

Sponsored