- Thread starter
- #31
Did you lose any bass having it set to 120? I feel like it would be pointless and would just sell the harness and return the amp at that point. I'm almost there lol. Have a week left to return the amp to amazoneverything works well. The kick panel speakers are a bit muddy but EQ helps. I’m having a terrible time getting the 500.1 to fit behind the side panel. You need to be millimeter perfect in the angle of you want to secure the plate to all four existing bolt holes AND screw the amp at all four corners to the plate. I’m on my third fabricated plate which still needs trimming. More to come once it’s all together.
I’ll be honest, you could probably just change the EQ with forscan, add the 500.1 and call it quits. The 200.4 is a little underpowered for the effort and cost of everything including harness and speakers at around $700 all in.
That would work for 90% of owners.
Edit: just saw your post above. Yes I have literally the same advice. The only difference is I have the 200.4 clipping 120hz on the dip switches and you have it at 90.
The remote knob for the 500.1 is a must too.
Sponsored